SUPERCORD 45

Product catalog summary

Top Features:
SUPERCORD 45 offers good slag detachability and excellent bead appearance with 100% efficiency. It operates on low open circuit voltage, making it suitable for tack welding or continuous welding.

Classification:
The electrode is classified under AWS A5.1 E6013 and EN ISO 2560-A E 42 0 R 12.

Current Type:
It can be used with AC and DC- current types.

Welding Positions:
Suitable for all positions except vertical down.

Approvals:
Approved by ABS.

Chemical Composition:
Typical all weld metal composition includes C: 0.08%, Mn: 0.6%, Si: 0.40%, P: 0.025%, S: 0.010%.

Mechanical Properties:
For all weld metal in 'As welded' condition, the typical yield strength is 460 MPa, tensile strength is 525 MPa, elongation is 24%, and impact ISO-V at 0°C is 55 J.

Output Range:
Available in various diameters and lengths with corresponding current ranges:

2.0 x 300 mm: 50-70 A
2.5 x 300 mm: 60-90 A
3.2 x 350 mm: 80-130 A
3.2 x 450 mm: 90-130 A

Packaging and Available Sizes:
Available in different packaging sizes:

2.5 x 300 mm: 215 electrodes/pack, 3.8 kg, Item number W000287189
3.2 x 450 mm: 130 electrodes/pack, 5.7 kg, Item number W000287190

Test Results:
Mechanical properties, deposit or electrode composition, and diffusible hydrogen levels are based on standard tests. Actual results may vary based on various factors. Users should confirm suitability through qualification testing.

Additional Information:
Safety Data Sheets (SDS) are available, and users should refer to the website for updated information.

Catalog excerpts

STICK ELECTRODE | MILD STEEL • Good slag detachability and excellent bead appearance. • Operates on low open circuit voltage, recommended for tack welding or continuous welding. WELDING POSITIONS All position, except vertical down CHEMICAL COMPOSITION (WEIGHT %), TYPICAL, ALL WELD METAL OERLIKON www.lincolnelectric.eu

Open the catalog to page 1

STICK ELECTRODE | MILD STEEL TEST RESULTS Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any...

Open the catalog to page 2

SUPERCORD 45

SUPERCORD 45

Catalog excerpts

All WELDLINE catalogs and technical brochures