Top Features:

• Easy to use for fillet welds in vertical down position.
• Produces flat or slightly convex beads with easy slag removal.
• Effective on poorly prepared pieces, pipes, and tubes.

Classification:

• AWS A5.1 E6013
• EN ISO 2560-A E 42 0 RC 1 1

Current Type: AC, DC-
Welding Positions: All positions
Approvals: LR, BV, CE
Chemical Composition (Weight %), Typical, All Weld Metal:

• C: 0.07
• Mn: 0.6
• Si: 0.4
• P: ≤0.03
• S: ≤0.03

Mechanical Properties, Typical, All Weld Metal:

• Yield Strength: ≥420 MPa
• Tensile Strength: 500-550 MPa
• Elongation: ≥24%
• Impact ISO-V (0°C): ≥47 J

Output Range:

• Diameter 1.6 x 300 mm: 35-50 A
• Diameter 2.0 x 350 mm: 45-65 A
• Diameter 2.5 x 350 mm: 60-95 A
• Diameter 3.2 x 350 mm: 85-125 A
• Diameter 3.2 x 450 mm: 95-125 A
• Diameter 4.0 x 350 mm: 120-180 A
• Diameter 4.0 x 450 mm: 140-190 A

Packaging and Available Sizes:

• 1.6 x 300 mm: 240 electrodes/pack, 1.6 kg, Item No. W000384783
• 2.0 x 350 mm: 160 electrodes/pack, 1.9 kg, Item No. W000384858
• 2.5 x 350 mm: 120 electrodes/pack, 2.1 kg, Item No. W000384661; 260 electrodes/pack, 4.5 kg, Item No. W000258557
• 3.2 x 350 mm: 65 electrodes/pack, 1.8 kg, Item No. W000384660; 160 electrodes/pack, 4.4 kg, Item No. W000258558
• 3.2 x 450 mm: 160 electrodes/pack, 5.6 kg, Item No. W000258559
• 4.0 x 350 mm: 105 electrodes/pack, 4.5 kg, Item No. W000258560
• 4.0 x 450 mm: 105 electrodes/pack, 5.8 kg, Item No. W000258561

Test Results:

Test results for mechanical properties, deposit or electrode composition, and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards. Actual results may vary based on factors such as weld procedure, plate chemistry, temperature, weldment design, and fabrication methods. Users should confirm suitability through qualification testing or other appropriate means before use.

Safety Data Sheets (SDS) are available online. Information is subject to change; refer to the website for updates.