*mydirectindustry

Pantafix

1 / 2 PagesView full catalog

Pantafix

Product catalog summary

Top Features

Medium thick rutile-cellulosic coated MMA electrode designed for structural steelwork.
High tolerance to impurities, making it suitable for primer painted and slightly rusted parts.
Effective for welding galvanized steel components.
Excellent performance in all positions, particularly vertically-down, with reliable penetration.
Good gap bridging and easy striking and restriking.

Classification

AWS A5.1 E6013
EN ISO 2560-A E 38 0 RC 11

Current Type

AC/DC-

Welding Positions

All positions

Approvals

TÜV

Chemical Composition (Weight %), Typical, All Weld Metal

C: 0.08
Mn: 0.5
Si: 0.3
P: ≤ 0.03
S: ≤ 0.03

Mechanical Properties, Typical, All Weld Metal

Condition: As welded
Yield Strength: Min. 330 MPa (AWS), Min. 380 MPa (EN ISO)
Tensile Strength: Min. 430 MPa (AWS), 470-600 MPa (EN ISO)
Elongation: Min. 17% (AWS), Min. 22% (EN ISO)
Impact ISO-V: Min. 60 J at +20°C (EN ISO)

Output Range

Diameter x Length (mm): 2.5 x 350, Current Range (A): 60-85
Diameter x Length (mm): 3.2 x 350, Current Range (A): 90-130
Diameter x Length (mm): 4.0 x 350, Current Range (A): 140-180

Packaging and Available Sizes

2.5 x 350 mm: 115 electrodes/pack, Net weight: 2.1 kg, Item number: 588691-1
3.2 x 350 mm: 160 electrodes/pack, Net weight: 4.4 kg, Item number: 588692-1
4.0 x 350 mm: 103 electrodes/pack, Net weight: 4.5 kg, Item number: 588693-1

Test Results

Test results for mechanical properties, deposit or electrode composition, and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards. Actual results may vary based on factors such as weld procedure, plate chemistry, and temperature. Users should confirm suitability through qualification testing or other appropriate means before use.

Safety Data Sheets (SDS) are available online. Information is subject to change; refer to the website for updates.

Catalog excerpts

STICK ELECTRODE | MILD STEEL WELDING POSITIONS All positions TOP FEATURES • Medium thick rutile-cellulosic coated MMA electrode for structural steelwork. • Suitable on primer painted and slighty rusted parts, as there is a high tolerance to impurities. • Suitable for welding galvanised steel components. • Excellent all positional operating characteristics, especially vertically-down and the arc characteristics ensures reliable penetration. • Good gap bridging and easy striking and restriking. CHEMICAL COMPOSITION (WEIGHT %), TYPICAL, ALL WELD METAL

Open the catalog to page 1

STICK ELECTRODE | MILD STEEL TEST RESULTS Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any...

Open the catalog to page 2

Pantafix

Pantafix

Catalog excerpts

All WELDLINE catalogs and technical brochures