Top Features:

• Excellent all positional operating characteristics, especially vertically-down.
• Produces flat, slightly concave weld beads in vertical-down position.
• Good gap bridging with easy striking and restriking.
• Used on mains transformers.

Classification:

• AWS A5.1 E6013
• EN ISO 2560-A E 38 0 RC 11

Current Type: AC, DC-
Welding Positions: All positions
Approvals: LR, BV, DB, DNV, TÜV
Chemical Composition (Weight %), Typical, All Weld Metal:

• C: 0.08
• Mn: 0.5
• Si: 0.3

Mechanical Properties, Typical, All Weld Metal:

• Condition: As welded (AW)
• Yield Strength: ≥330 MPa (AWS A5.1), ≥380 MPa (EN ISO 2560-A)
• Tensile Strength: ≥430 MPa (AWS A5.1), 470-600 MPa (EN ISO 2560-A)
• Elongation: ≥17% (AWS A5.1), ≥20% (EN ISO 2560-A)
• Impact ISO-V (J): Not specified (AWS A5.1), ≥47 at 0°C (EN ISO 2560-A)
• Typical Values: Yield Strength 457 MPa, Tensile Strength 520 MPa, Elongation 26%, Impact 85 J at +20°C, 64 J at 0°C

Output Range:

• Diameter x Length (mm): 2.5 x 350, Current Range (A): 60-85
• Diameter x Length (mm): 3.2 x 350, Current Range (A): 90-130
• Diameter x Length (mm): 4.0 x 350, Current Range (A): 140-180

Packaging and Available Sizes:

• 2.5 x 350 mm: CBOX, 244 electrodes/pack, Net weight 4.5 kg, Item number W000287110
• 3.2 x 350 mm: CBOX, 163 electrodes/pack, Net weight 4.5 kg, Item number W000287111
• 4.0 x 350 mm: CBOX, 103 electrodes/pack, Net weight 4.5 kg, Item number W000287112

Test Results:

Test results for mechanical properties, deposit or electrode composition, and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards. Actual results may vary based on factors such as weld procedure, plate chemistry, and temperature. Users should confirm suitability through qualification testing or other means before use.

Safety Data Sheets (SDS) are available online. Information is subject to change; refer to the website for updates.