*mydirectindustry

FINCORD

1 / 2 PagesView full catalog

FINCORD

Product catalog summary

Top Features

Easy striking and restriking, suitable for touch-welding.
Stable arc with minimal spatter and self-releasing slag.
Produces clean, finely-rippled weld beads without undercut.
Compatible with mains transformers.

Classification

AWS A5.1 E6013
EN ISO 2560-A E 42 0 RR 12

Current Type

AC, DC-

Welding Positions

All positions except vertical down.

Approvals

LR, BV, DNV, TÜV, DB

Chemical Composition (Weight %), Typical, All Weld Metal

C: 0.08
Mn: 0.6
Si: 0.45

Mechanical Properties, Typical, All Weld Metal

Condition: As welded (AW)
Yield Strength: ≥330 MPa (AWS), ≥420 MPa (EN ISO)
Tensile Strength: ≥430 MPa (AWS), 500-640 MPa (EN ISO)
Elongation: ≥17% (AWS), ≥20% (EN ISO)
Impact ISO-V (0°C): Not specified (AWS), ≥47 J (EN ISO)
Typical Values: Yield Strength 470 MPa, Tensile Strength 530 MPa, Elongation 26%, Impact 64 J

Output Range

Diameter x Length (mm)	Current Range (A)
1.6 x 250	30-60
2.0 x 350	50-75
2.5 x 250	65-90
3.2 x 350	100-140
3.2 x 450	100-140
4.0 x 350	140-210
4.0 x 450	150-195
5.0 x 450	170-240

Packaging and Available Sizes

Diameter x Length (mm)	Packaging	Electrodes/pack	Net weight/pack (kg)	Item number
1.6 x 250	CBOH	220	1.3	W000287198
2.0 x 350	CBOH	170	2.2	W000380798
2.5 x 350	CBOX	210	4.2	W000287201
3.2 x 350	CBOX	125	4.3	W000287202
3.2 x 450	CBOX	118	5.7	W000287203
4.0 x 350	CBOX	78	4.3	W000287204
4.0 x 450	CBOX	78	5.6	W000287205
5.0 x 450	CBOX	50	5.2	W000287206

Test Results

Test results for mechanical properties, deposit or electrode composition, and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards. Actual results may vary based on factors such as weld procedure, plate chemistry, and temperature. Users should confirm suitability through qualification testing or other means before use.

Safety Data Sheets (SDS) are available online. Information is subject to change; refer to the website for updates.

Catalog excerpts

STICK ELECTRODE | MILD STEEL • Easy strinking and restriking and used for touch-welding AWS A5.1 E6013 • The arc is stable with very low spatter and the slag is EN ISO 2560-A E 42 0 RR 12 generally self-releasing. • The weld beads are finely-rippled and clean, blending into the CURREWT TYPE base plate without undercut. AC, DC- • Suitable for use with mains transformers. All position, except vertical down OERLIKON www.lincolnelectric.eu

Open the catalog to page 1

STICK ELECTRODE | MILD STEEL TEST RESULTS Test results for mechanical properties, deposit or electrode composition and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any...

Open the catalog to page 2

FINCORD

FINCORD

Catalog excerpts

All WELDLINE catalogs and technical brochures