Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. WELD-TECH
  3. IHP all on board

IHP all on board

IHP all on board
1 / 2 PagesView full catalog

IHP all on board

Product catalog summary
Overview
Weld-Tech has been producing internal hydraulic clamps for pipe welding for over 20 years. Their products are designed to be economical, easy to handle, and effective, with a focus on hydraulic technology as the future of pipe welding.
Product Specifications
  • Non-Powered Clamps: Range from 5” to 24” with various models like ihp1824, mini ihp, and ihp1016. Each clamp comes with a 15m hydraulic hose, a 15m reach rod, and a hand-operated pump with a valve kit.
  • Powered Clamps (AOB): Range from 18” to 60” with models such as ihp1824 AOB and ihp5660 AOB. These clamps include features like wireless remote control, automatic stop at the end of the pipe, and are powered by two 24V drive motors.
Key Features
  • Economical: Low maintenance cost and one clamp can be used for three pipe sizes.
  • Easy Handling: No presetting for specific inner diameters and no need for cables, hoses, or compressors.
  • Effectiveness: Excellent alignment and reforming capacity, with a battery effective for up to 100 weldings.
Technical Specifications
  • Drive Motors: 24 Volts, 3000 rpm, 300W with VF44 1-35 gearing.
  • Batteries: Two sets of 24 Volts batteries.
  • Additional Equipment: Includes gas springs, infrared sensors, electronic and hydraulic pumps, magnetic valves, and wireless remote control.
Performance
All clamps, both powered and non-powered, can reform pipes with wall thickness up to 25 mm and align pipes with wall thickness up to 50 mm.
See more

Catalog excerpts

IHP all on board-1

IHP – All On Board (AOB) Wireless remote control POWERED (18” - 60”) hand operated pump Each AOB clamp have following specifications: 2 pcs drive motors (top & bottom) 24Volts, 3000 rpm, 300W Gearing VF44 1-35 2 sets of batteries (24 Volts) Gas springs to activate the motors to ensure always in full contact with pipe infrared sensor in the front for automatic stop at the end of the pipe Electronic and hydraulic pump mounted on the clamp 1 pc remote control (wireless) 1 pc battery charger for batteries 1 pc battery charger for remote control 1 pc handoperate pump in the front to pull-in motors for insert the clamp in the pipe or for transp

 Open the catalog to page 1
IHP all on board-2

For more than 20 years Weld-Tech has produced internal hydraulic clamps for pipe welding. Build on the prediction that hydraulic was the future "state of the art" in pipe-welding, Weld-Tech has created a unique range of clamps in close cooperation with costumers around the Globe. The Weld-Tech AOB iHPs have the following benefits: • Economical due to: Low maintenance cost; one damp for 3 pipe sizes (2 for pneumatic range) • Easy to handle due to: No presetting for specific inner diameter; no cables, hoses, reach rod or compressor • Effective due to: Great alignment and reforming capacity; wireless...

 Open the catalog to page 2

All WELD-TECH catalogs and technical brochures

  1. WT Fix and WT Fold, WT High/Low
    WT Fix and WT Fold, WT High/Low

    2  Pages

  2. WT Multi
    WT Multi

    1  Page

  3. WT Flexi Stand
    WT Flexi Stand

    1  Page

  4. Manual Pipe Clamps, single
    Manual Pipe Clamps, single

    1  Page

  5. CCP-CCH
    CCP-CCH

    1  Page

  6. IMC, IMF
    IMC, IMF

    1  Page

  7. DMC
    DMC

    1  Page

  8. Tools for Pipe Welding
    Tools for Pipe Welding

    24  Pages

  9. Manual Pipe Clamps, double
    Manual Pipe Clamps, double

    1  Page

  10. WT Clamp
    WT Clamp

    1  Page

  11. WT Steel Clamp
    WT Steel Clamp

    1  Page

Archived catalogs

  1. Panther
    Panther

    1  Page

  2. OrbiWeld
    OrbiWeld

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.