Transmitter Series XT-800R
4Pages

TLI Application Area: Resolution: Min. Mounting Length: Max. Mounting Length: Industry, Chemical Industry 5 +/- 2 mm 400 mm 3000 mm Transmitters of the series XM-800R (XT-800R) provide reliable measurement and control for liquid levels. Additionally they can be used as position sensors for vertical displacements. These are developed from the standard series XM-800E. The signal-matching electronic system is integrated into the switching tube. This results in a functional 2wire transmitter with a 4...20mA output signal, offering all the variations of the standard series for applications where space is limited. The transmitters are built according to user-specific requirements. They have proved successful in a wide range of different industrial applications as well as in many special applications. Depending on liquid level or displacement a magnet equipped float actuates some reed switches located in the stem. The resulting signal will be converted into a current signal proportional to the float position. Such signals can be processed to drive analog or digital displays, give optical or acoustical alarms, or be fed into computers.

Flange DN65/PN16 EN1092-1 * • BCCC 316/316L/316Ti • Other flanges on request Min. DN65 od. 2 1/2" ANSI Tank screw fixing 1" • TC 1 316/316L/316Ti Tank screw fixing 2" * • TC 2 316/316L/316Ti Type Material Max. pressure Media temperature Minimum density of the liquid Immersion depth at density = 1 g/cm3 * Versions with protection tube (damping tube) on request Tli E/02.2017 Modifications reserved

Electrical connection XT-800R (2-wire) • S Plug connector Pg9 Pg11 Ø 7...12mm Brass; Nickel plated SW21 Ø 7...12mm Pg13,5 Brass; Nickel plated SW21 Wiring diagram XT-800R with voltage signal Insulation Isolation Wire Litze Function The fundamental operating principle of the XT-800R transmitter is the same as that for the XM-800E series. However, when it is connected to a voltage of 10... 30VDC, the XT-800R transmitter functions as a current sink, superimposing a 4 ... 20mA current analogous to the float position onto the signal. Two potentiometers are located in the top section of the tube...

Order Data Type Key: XT-800R-...-...-...-... Electrical connection •S Plug connector • K6 Junction box • K11 Junction box • P-PVC PVC cable, with cable gland (Standardlength 3m) • P-Si Si cable, halogen free, with cable gland (Standardlength 3m) Mounting element • BCCC Flange 316/316L/316Ti • Other flanges on request • TC 1 Tank screw fixing 316/316L/316Ti • TC 2 Tank screw fixing 316/316L/316Ti • AC Bulkhead fitting 316/316L/316Ti Mounting direction: •O from top Mounting length (LO max. = 3000 mm) Indication length (float displacement) Upper deadline Lower deadline min. 10 mm Float height...