Application Area: Resolution: Min. Mounting Length: Max. Mounting Length: Industry, Chemical Industry 5 +/- 2 mm 400 mm 3000 mm Transmitters of the series XM-800E (XT-800E) provide reliable measurement and control for liquid levels. Additionally they can be used as position sensors for vertical displacements. The transmitters are built according to user-specific requirements. They have proved successful in a wide range of different industrial applications as well as in many special applications. Depending on liquid level or displacement a magnet equipped float actuates some reed switches located in the stem. The transmitter works according to the principle of a voltage divider. Output signals can be a voltage (XM-800E) or a current (XT-800E) proportional to the float displacement. Such signals can be processed to drive analog or digital displays, give optical or acoustical alarms, or be fed into computers.

Flange DN65/PN16 EN1092-1 * • BCCC 316/316L/316Ti • Other flanges on request. Min. DN65 od. 2 1/2" ANSI Tank screw fixing 1" • TC 1 316/316L/316Ti Inside screw fixing 1/2" • EC 1/2 316/316L/316Ti Tank screw fixing 2"* • TC 2 316/316L/316Ti Inside screw fixing 1" • EC 1 316/316L/316Ti Type Material Max. pressure Media temperature Minimum density of the liquid Immersion depth at density = 1 g/cm3 * Versions with protection tube (damping tube) on request Tli E/02.2017 Modifications reserved

Electrical connection XM-800E (3-wire) • S Plug connector ca.48 Pg11 Ø 7...12mm Brass; Nickel plated SW21 Pg13,5 Ø 7...12mm Brass; Nickel plated SW21 Pg13,5 Ø 7...12mm Brass; Nickel plated SW21 Note Because of the internal wiring of the transmitter, the output voltage and not the transmitter resistance has to be measured when a test is taken. Transmitter Messwertgeber Wiring diagram XT-800E with current signal Wiring diagram XM-800E with voltage signal Function Operation of the transmitter in connection with signal processing units; In this mode of operation voltage supply is provided by the...

Order data Type code: X...-800E-...-...-...-... Electrical connection •S Plug connector • K6 Junction box • K11 Junction box • P-PVC PVC cable, with cable gland (Standardlength 3m) • P-Si Si cable, halogen free, with cable gland (Standardlength 3m) Mounting element • BCCC Flange 316/316L/316Ti • Other flanges on request • TC 1 Tank screw fixing 316/316L/316Ti • TC 2 Tank screw fixing 316/316L/316Ti • EC 1/2 Inside screw fixing 316/316L/316Ti • EC 1 Inside screw fixing 316/316L/316Ti • AC Bulkhead fitting 316/316L/316Ti Mounting direction •O From top •U From bottom Transmitter •M 3-wire 10...24...