Transmitter Series XM-800E-PVDF (Transmitter Series XT-800E-PVDF) TLI Application Area: Resolution: Min. Mounting Length: Max. Mounting Length: Industry, Chemical Industry 5 +/- 2 mm 400 mm 3000 mm Transmitters of the series XM-800E-PVDF (XT-800EPVDF) provide reliable measurement and control for liquid levels. Additionally they can be used as position sensors for vertical displacements. The transmitters are built according to user-specific requirements. They have proved successful in a wide range of different industrial applications as well as in many special applications. The PVDF series was specially developed for the foodstuffs industry, medical technology and other particularly exacting chemical applications. The transmitters are able to withstand acids, acidic compounds, bromines and pure media. They are not recommended for use with caustic soda or media having pH values >12. Materials • Stem: • Float: • Flange: • Set collars: • Junction boxes: Depending on liquid level or displacement a magnet equipped float actuates some reed switches located in the stem. The transmitter works according to the principle of a voltage divider. Output signals can be a voltage (XM-800EPVDF) or a current (XT800E-PVDF) proportional to the float displacement. Such signals can be processed to drive analog or digital displays, give optical or acoustical alarms, or be fed into computers. PVDF PVDF PVDF PTFE ABS

Transmitter Series XM-800E-PVDF (Transmitter Series XT-800E-PVDF) Type Material Max. pressure Media temperature Minimum density of the liquid Immersion depth at density = 1 g/cm3

Transmitter Series XM-800E-PVDF (Transmitter Series XT-800E-PVDF) Transmitter Messwertgeber Electrical diagram XT-800E-PVDF with current signal Electrical diagram XM-800E-PVDF with voltage signal Hint Because of the internal wiring of the transmitter, the output voltage and not the transmitter resistance has to be measured when a test is taken. Function Operation of the transmitter in connection with signal processing units; In this mode of operation voltage supply is provided by the processing units. Operation of the transmitter in connection with other signal processing units: 10...24 V DC,...

Transmitter Series XM-800E-PVDF (Transmitter Series XT-800E-PVDF) Order Data Electrical connection Mounting element • BF PVDF Mounting direction •O From top •U From bottom Transmitter •M 3-wire 10...24 V DC •T 2-wire 4...20 mA Mounting length (LO max. = 3000 mm) Indication length (float displacement) Upper deadline Lower deadline min. 15 mm Float height Typical order data XM-800E-PVDF-O-BF-P75-K6 (example) LO A C1 C2 O BF P75 Mounting length 800 mm Indication length 620 mm Upper deadline 100 mm Lower deadline 10 mm Top mounting Flange DN80/PN6 Float H=70 mm For versions with an upper set collar:...