f\ I I7V7%\ micRni www.weka-ag.chThermal Insulation20060307/xx 10 Single Laver Insulation Applicable for types: Standard Indicators (23614, 34300, 32755) High-Pressure Indicators (36800, 26411,25683, 32806) Petro Indicators Plastic Indicators Top of Tank Indicators (based on 23614) Technical data: Liquid temperature 1*) Temperature difference AT 2*) Relative humidity Ambient temperature Material / Item No. a Insulation 3*) b Insulation band (3xM+0,8m) c Protection tube d Retainer e Hose clamp 5*) Order data: Synthetic rubber Various 20 Double Layer Insulation Applicable for types: Standard Indicators (23614, 34300, 32755) High-Pressure Indicators (36800, 26411,25683, 32806) Petro Indicators Plastic Indicators Top of Tank Indicators (based on 23614) Technical data: Liquid temperature 1 *) Temperature difference AT 2*) Relative humidity Ambient temperature Material / Item No. a Insulation 3*) b Inner insulation 4*) c Insulation band (3xM+0.8m) d Protection tube e Retainer f Hose clamp 5*) Order data: Synthetic rubber Various Synthetic rubber Various Comments: 1*) Liquid temperature range may be partially reduced due to temperature ratings of auxiliary devices (switch, transmitter, etc.) 2*) Difference between liquid temperature and ambient temperature 3*) Insulation (thickness s=19mm) for different pipe-0 available 4*) Inner insulation (thickness s = 13mm) only for double layer insulation 5*) Hose clamps available for various float chamber diameters (For the 20060307/20 insulation assembly, the spacing between clamps is limited to 30cm to prevent bending of the indication rail) DS_Insulations_Heating_ Systems_2009_03_20_E WEKA AG - Schuerlistrasse 8 - CH-8344 Baeretswil - Switzerland [email protected] - www.weka-ag.ch