Laboratory test chambers for R&D and quality control.

Product catalog summary

Overview: The document describes the LabEvent test chambers by Weiss Technik GmbH, designed for temperature tests in research, development, and quality control. These chambers are compact, efficient, and suitable for workplace environments.

Key Features:

Uses climate-friendly CO₂ refrigerant R744 with a Global Warming Potential (GWP) of 1.
Compact design minimizes external footprint.
Plug & Play functionality with a 230-volt connection.
Low noise levels allow for tests directly at the workplace.
Stress screening tests available in 5 or 10 K/min variants.

Specifications:

Temperature tests comply with DIN, ISO, MIL, IEC, DEF, and STM standards.
Temperature range from 180 °C to -70 °C, with single-stage units reaching down to -50 °C.
Available test room volumes range from 16 to 210 litres.
Stackable, bench-top, or mobile versions available.

Standard Configuration Includes:

Integrated 18 cm (7") web panel.
High-quality, rust-resistant stainless steel 1.4301 construction.
USB and Ethernet ports for data recording.
Platinum sensor Pt 100 for temperature control.
Independent, adjustable temperature limiter.
Condensation protection and intuitive web-based interface WEBSeason®.

Applications:

Supports testing to standards such as LV124 and IEC 60068 series.
Suitable for electronics industry with low-silicone test chambers.
Optional EMC tests for 5G and autonomous driving technologies.
High reliability for aerospace and defense sectors.
Equipped for safe battery testing with hazard levels 3 or 4.

Contact Information: Weiss Technik GmbH, Greizer Straße 41–49, 35447 Reiskirchen/Germany. Phone: +49 6408 84–0, Email: [email protected], Website: weiss-technik.com

Catalog excerpts

Laboratory test chambers for R&D and quality control.-1

weisstechnik LabEvent Laboratory test chambers for R&D and quality control.Reliable temperature tests in the versatile space miracle LabEvent. Temperature tests according to DIN, ISO, MIL, IEC, DEF and STM are relevant in research, development and quality control. The LabEvent test chambers are designed for this purpose and enable reproducible tests in the smallest of spaces, directly at the workplace. Thanks to their compact design and exceptional performance, they set standards in their class. With wide temperature range, fast temperature change and precise control. - Compact design for minimal external footprint - Plug & Play thanks to 230 volt connection - Low noise for tests directly at the workplace - Stress screening tests with 5 or 10 K/min variants

Open the catalog to page 1

Laboratory test chambers for R&D and quality control.-2

Subject to technical changes. Included in the standard configuration: >/ Stackable table variants (16 to 150 litres) >/ High-quality, rust-resistant stainless steel 1.4301 ✓ One access port on the right side >/ USB port for data recording (csv) and Ethernet port Platinum sensor Pt 100 for temperature control ✓ Independent, adjustable temperature limiter t /t ✓ Intuitive, web-based user interface WEBSeason® The right size for every test specimen. - Available with test room volume from 16 to 210 litres - Stackable, bench-top or mobile version available. - Stress screening tests with 5 K/min and...

Open the catalog to page 2