From simple dust protection to dust-tightness.

Product catalog summary

Overview: The DustEvent ST dust testing devices by Weiss Technik are designed for conducting protection class tests according to DIN EN 60529 (VDE 0470-1) IP5X and IP6X standards. These devices are suitable for testing electrical products and lithium-ion batteries, offering flexibility to meet various dust testing standards.

Key Features:

Test area floor aligned with the loading sill for ease of use.
Low-noise dust transport system that operates without vibrations.
Compact design for a small footprint.
Capability to connect with S!MPATI® and acquire digital measured values.
Customizable solutions available for specific project needs.

Specifications:

Available test chamber sizes: approximately 1000 litres and 2000 litres, with other sizes available upon request.
Standard configuration includes stainless steel test chamber floor, webpanel operation, mobile version with castors, and test chamber lighting with a 1000 lm LED lamp.
Access port of 100 mm in the side wall for convenience.

Technical Data:

Test space volume: 900 litres for ST/1000 and 1800 litres for ST/2000.
Test space dimensions: 950 x 1000 x 950 mm for ST/1000 and 1900 x 1000 x 950 mm for ST/2000.
External dimensions: 1300 x 2005 x 1000 mm for ST/1000 and 2250 x 2005 x 1000 mm for ST/2000.
Maximum load on test room floor: 50 kg.
Test specimen volume for negative pressure device: 1 to 62.5 litres.

Additional Information: All performance data are based on an ambient temperature of +25 °C. Weiss Technik reserves the right to make technical changes without prior notice.

Catalog excerpts

From simple dust protection to dust-tightness.-1

From simple dust protection to dust-tightness. Our Highlights: Customised test solutions for electrical products and lithium-ion batteries. With the DustEvent ST dust testing devices from Weiss Technik, you can carry out protection class tests in accordance with DIN EN 60529 (VDE 0470-1) IP5X and IP6X. The devices are available with test chamber sizes of approx. 1000 litres and approx. 2000 litres. Other sizes are available on request for specific projects. - Test area floor at the same height as the loading sill - Low-noise dust transport without vibrations - Small footprint thanks to space-saving design - Flexibility to fulfill all common dust testing standards - S!MPATI® connection and digital measured value acquisition possible - Customised special solutions

Open the catalog to page 1

From simple dust protection to dust-tightness.-2

Convincing technology. Reliable results. Test space dimensions (WxHxD) Maximum load test room floor Test space volume Test specimen volume for negative pressure device2 Overall dimensions when installed, including switch cabinet mounted on the right-hand side of the test room (looking at the test room door). When carrying out the test in accordance with DIN EN 60529. All performance data refer to an ambient temperature of +25 °C. We reserve the right to make any technical changes without prior notice. Included in the standard configuration: Implementation of test standards according to DIN EN...

Open the catalog to page 2