1. Catalogs
  2. Weiss Technik
  3. Climatic Test Chamber ClimeEvent

Climatic Test Chamber ClimeEvent

Climatic Test Chamber ClimeEvent
1 / 25 PagesView full catalog

Climatic Test Chamber ClimeEvent

Product catalog summary
Standards and Specifications
The ClimeEvent climatic test chamber complies with key industry standards such as IEC 60068-2-1, IEC 60068-2-2, and IEC 60068-2-14, ensuring reliable testing conditions for low, high, and alternating temperature tests.
Structure and Features
The chamber includes a LED status bar, web panel, master switch panel, and stainless steel access port. It is mobile with vibration-absorbing feet and heavy-duty castors. Interfaces include Ethernet and USB, with an independent temperature limiter.
Installation and Dimensions
Installation drawings and dimensions are provided for chamber sizes from 180 to 2000 liters, with standard and additional access ports available.
Technical Data
The chambers operate between -70°C and +180°C, with temperature change rates of 3 K/min to 5 K/min. Humidity control is enhanced for accuracy.
Consumption and Connection
Operating on 400 V, power ranges from 4.4 kW to 23 kW. Sound pressure levels and heat dissipation rates are specified.
Basic Equipment
The exterior is galvanized steel with a powder-coated finish, and the interior is stainless steel. A rail system allows easy grid position changes, and the climate system includes a water reservoir and purge device.
Specifications
Includes stainless steel test chamber with silicone plugs, platinum temperature sensor Pt 100S, and psychrometric humidity measurement. GreenMode³ reduces energy consumption by up to 30%.
Regulation & Control
The S!MPAC® system features a 25.4 cm web panel for remote control, with Ethernet and USB interfaces for data documentation.
Safety
Includes independent and software temperature limiters, a safety temperature limiter (STL), and a test chamber fuse for specimen protection.
Humidity and Dewing Test
Equipped for dewing tests according to GS 95011-4 for automotive electronic assemblies, with appropriate dehumidification capacity.
Options and Installations
Includes mobile versions, storage packages, and various door options. Water treatment options include demineralization units and activated carbon filters.
Test Specimen Support
Options include drawers, heavy-duty rails, and reinforced shelves. Dehumidification devices are available for specific dew points.
Calibration and Standards
Offers factory and DAkkS calibration, compliance with automotive standards, and modifications for specific requirements.
Test Space Installations
Features stainless steel reservoirs, sprinkler systems, and IR irradiation equipment. Adjustable recirculating air volume controls airflow.
Sensors and Control System
Includes temperature and humidity sensors, with options for additional digital I/O and analog value measurement cards.
Safety Equipment
Features hazard level safety packages, ESD protection, door contact switches, and emergency stop switches.
Cooling
Equipped with water cooling and a pump system for water management.
Cooling Water Network and Insulation
Includes flexible hoses for cooling water network connection and insulated pipes.
Deep Freeze Stage and Refrigerant
Uses refrigerant R23 for deep-freeze stage, with electronic cooling water controller for adjustments.
Air Cooled Condenser
Routes waste heat to an external condenser, positioned horizontally with vertical airflow.
Special Voltage
Special voltages available upon request.
Software Solutions: WEBSeason & S!MPATI
Unified software solutions for control and monitoring, with features like email alerts and real-time access.
Product Configurator and Service
Digital advisor for model configuration, with expert advice, maintenance, and spare parts management.
Company Overview
Weiss Technik GmbH provides environmental simulation, heat technology, air solutions, and pharmaceutical technology products globally.
See more

Catalog excerpts

Climatic Test Chamber ClimeEvent-1

Data sheet Abbildung ähnlich (enthält Optionen) Climatic Test Chamber ClimeEvent

 Open the catalog to page 1
Climatic Test Chamber ClimeEvent-2

Data sheet | ClimeEvent STANDARDS Low-temperature tests Constant climates ETSI EN 300019-2-4, Test Ab/Ad ISO 16750-4, Damp heat steady High-temperature tests IEC 60068-2-2, Test B Alternating climates ETSI EN 300019-2-4, Test Bb/Bd ISO 16750-4, Damp heat cyclic ETSI EN 300019-2-4, Test Db VG 95210, Blatt 7, Meth. 106C Alternating temperature tests OUR STANDARD FINDER The right support for every test. Various industry and factory standards are safely met. You can find a selection of test specifications and standards by using the specially developed standards finder on our website. The standards...

 Open the catalog to page 2
Climatic Test Chamber ClimeEvent-3

Data sheet | ClimeEvent Test space, test space door Front panel, water reservoir Heavy duty castors View from front Pressure equalization port Power supply Test space door and door lock Master switch panel Stainless steel access port Power supply unit, control cabinet Machine part Adjustable vibration absorbing feet View from front/ lateral

 Open the catalog to page 3
Climatic Test Chamber ClimeEvent-4

Data sheet | ClimeEvent STRUCTURE | Master switch panel Independent, adjustable temperature limiter Main switch Measuring sensor temperature Pt 100 Error message potential-free contact Option/ Additional equipment

 Open the catalog to page 4
Climatic Test Chamber ClimeEvent-5

Data sheet | ClimeEvent INSTALLATION DRAWINGS | ClimeEvent B3 C5 C2 View from front View from right View from left Standard access ports R & L View from above Installation position right Ø 125mm (standard) Installation position left Ø 50mm (standard) R2-R12 Additional installation position right L2-L12 Additional installation position left Test space Test space Standard access ports R & L 2,3 1 Overall external dimensions when erected 2 Only the standard access ports R1-R3 and L1-L3 are available for the 180 liter versions 3 Additional feedthroughs are possible for the 1500 and 2000 litre variants....

 Open the catalog to page 5
Climatic Test Chamber ClimeEvent-6

Data sheet | ClimeEvent TECHNICAL DATA | 180-600 Litres Temperature change rate: 3 K/min C2/180/40/3 DIMENSIONS, LOAD, WEIGHT Height Load, maximum Test chamber dimensions Test space capacity Maximum number of grid shelves Weight2 PERFORMANCE DATA FOR TEMPERATURE TESTS Maximum temperature Temperature change rate , Cooling Temperature change rate4, Heating Temperature deviation5 over time Temperature homogeneity , spatial +80 and -25 ( devices down to -42°C) +80 and -40 ( devices down to -70°C) PERFORMANCE DATA FOR CLIMATE TESTING Temperature range Humidity range Humidity deviation , over time...

 Open the catalog to page 6
Climatic Test Chamber ClimeEvent-7

Data sheet | ClimeEvent TECHNICAL DATA | 1000-2000 Litres Temperature change rate: 3 K/min C2/1000/40/3 DIMENSIONS, LOAD, WEIGHT External dimensions1 Test chamber dimensions Test space capacity Load, maximum Maximum number of grid shelves Weight2 PERFORMANCE DATA FOR TEMPERATURE TESTS Maximum temperature Temperature change rate , Heating Temperature deviation5 over time Minimum temperature Temperature change rate4, Cooling 4 Temperature gradient +80 and -25 ( devices down to -42°C) +80 and -40 ( devices down to -70°C) PERFORMANCE DATA FOR CLIMATE TESTING Temperature range Dew point temperature...

 Open the catalog to page 7
Climatic Test Chamber ClimeEvent-8

Data sheet | ClimeEvent TECHNICAL DATA | 180-600 Litres Temperature change rate: 5 K/min C2/180/40/5 DIMENSIONS, LOAD, WEIGHT Height Load, maximum Test chamber dimensions Test space capacity Maximum number of grid shelves Weight2 PERFORMANCE DATA FOR TEMPERATURE TESTS Maximum temperature Temperature change rate , Cooling Temperature change rate4, Heating Temperature deviation5 over time Temperature homogeneity , spatial +80 and -25 ( devices down to -42°C) +80 and -40 ( devices down to -70°C) PERFORMANCE DATA FOR CLIMATE TESTING Temperature range Humidity range Humidity deviation over time Temperature...

 Open the catalog to page 8
Climatic Test Chamber ClimeEvent-9

Data sheet | ClimeEvent TECHNICAL DATA | 1000-2000 Litres Temperature change rate: 5 K/min C2/1000/40/5 C2/1000/70/5 C2/1500/40/5 C2/1500/70/5 C2/2000/40/5 C2/2000/70/5 DIMENSIONS, LOAD, WEIGHT External dimensions1 Test chamber dimensions Test space capacity Load, maximum Maximum number of grid shelves 2 PERFORMANCE DATA FOR TEMPERATURE TESTS Maximum temperature Temperature change rate4, Cooling Temperature change rate4, Heating Minimum temperature Temperature deviation over time 5000 +80 and -25 ( devices down to -42°C) +80 and -40 ( devices down to -70°C) PERFORMANCE DATA FOR CLIMATE TESTING...

 Open the catalog to page 9
Climatic Test Chamber ClimeEvent-10

Data sheet | ClimeEvent TECHNICAL DATA | Explanation of Notes 1 Overall dimensions when installed. For size 300 l excluding machine unit. Deviating delivery dimensions; components for delivery can be dismantled (service performance). Basic device, excluding additional equipment Temperatures >+5 °C can be run in continuous operation, temperatures <+5 °C can be run intermittently or with additional equipment in the form of a compressed air dryer. In the center of the test chamber in a steady condition, without test specimen, without irradiation and without additional equipment, depending on the...

 Open the catalog to page 10
Climatic Test Chamber ClimeEvent-11

Data sheet | ClimeEvent BASIC EQUIPMENT EXTERIOR External housing Material Paint Galvanized steel sheet Light gray (RAL 7035) & anthracite gray (RAL 7016); solvent-free; powder-coated. Single-hand operation, lockable, door hinge left, with LED status bar Adjustable feet Adjustable, vibration absorbing Climate system Humidification water Purge device Water reservoir (approx. 25 l), pre-installed device for automatic water replenishment, warning message in the event of a low water level, display of water consumption The high quality of the humidification water is guaranteed by periodic water exchange...

 Open the catalog to page 11
Climatic Test Chamber ClimeEvent-12

Data sheet | ClimeEvent HUMIDITY CHART Test space temperature Relative humidity Standard humidity range for continuous operation Standard humidity range with intermittent operation, dew point 3 °C to +4 °C Extended humidity range with compressed air dryer (optional), dew point regulated down to -12 °C Extended humidity range with compressed air dryer (optional) and capacitive humidity measurement system (optional), dew point regulated down to -20°C DEWING TEST ACCORDING TO GS 95011-4 (K-15 OF LV 124) The dewing test according to standard GS 95011-4 (also known as K-15 of LV 124) describes the...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.