Catalogs >
Weiss Chemie >
COSMOPU-190.110

COSMOPU-190.110
3Pages

Catalog excerpts

Technical Data Sheet ***COSMOPUR FaserPlus+ 1-C-PUR-Construction adhesive Examples for Application Special Properties ▪ Aluminium window and door manufacturing for bonding of corner connectors ▪ Board joint bonding of cassettes in the wood, window and front door area ▪ Stair construction and building trade ▪ With many assembly bonding processes ▪ semi-hard adhesive joint ▪ Thixotropic, does not drop off ▪ Compatible with natural stone ▪ It does not beat away in the wood fibres due to its structural pigments included. ▪ Diverse industrial fields ▪ Expands (foams) during the curing process! ▪ Good adhesion characteristics to several types of wood, and building material, ceramics, metal, duroplast and thermoplastic after appropriate preparation of the surface. ▪ High bonding strength with head wood bonding ▪ Good bonding strength at heat ▪ Can subsequently be powder-coated (30 min/+200 °C) Certificates / Test reports ift Rosenheim If wood is glued to wood, it achieves the durability class D4 as per DIN EN 204. Test report No.: 505 33042/1 R1 ift Rosenheim If wood is glued to wood, it achieves a heat resistance as per DIN EN 14257 (WATT 91) of 10.5 N/mm2 Test report No.: 505 33042/2 R1 French VOC-Emission class A+ Technical Data Basis Colour hard-dry Skinning time - dry at +20 °C, 50 % r. H., applied quantity 500 μm-PE/PVC Skinning time - wet at +20 °C, sprayed with water; applied quantity 500 μm-PE/ PVC Curing time at +20 °C, 50 % r. H. until ~75 % Curing time at +20 °C, 50 % r. H. until it reaches the final strength Functional strength e.g. solid wood bonding at +20 °C Applied quantity depending on carrier material Processing temperatures adhesive and substrates Bonding strength at heat as per DIN EN 14257 (WATT 91) Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Open the catalog to page 1

Technical Data Sheet ***COSMOPUR FaserPlus+ 1-C-PUR-Construction adhesive General Information Paint the bonded workpieces only after the adhesive has cured completely; if they are painted too early, formation of paint bubbles cannot be excluded. If permanent humidity impact is expected, the bonded joints/bonded surfaces must additionally be sealed/protected using a "suitable sealant". Bonding of materials with different longitudinal extension must be assessed regarding their long-term behaviour, especially when they are exposed to fluctuating temperature ranges. The cured mass changes its...

Open the catalog to page 2

Technical Data Sheet ***COSMOPUR FaserPlus+ 1-C-PUR-Construction adhesive If metals are bonded with absorbent materials (e.g. wood, building materials, etc.), humidity can be transported slowly through the absorbent material, through the bonded joint, to the metallic surface and here, it can cause corrosion damages on the metal. Therefore, the metallic bonding surface must be equipped with an appropriate corrosion protection, e. g. varnish, powder coating! Powder coatings with shares of PTFE cannot be bonded reliably without pre-treatment (e. g. plasma procedure). Bonding of wood Bonding of...

Open the catalog to page 3