Catalogs >
Weiss Chemie >
COSMOPU-100.110

COSMOPU-100.110
3Pages

Catalog excerpts

Technical Data Sheet 1-C-PUR-Assembly adhesive Examples for Application Special Properties ▪ tough-elastic adhesive joint ▪ Aluminium window and door manufacturing for bonding of corner connectors ▪ Window and door construction ▪ Compatible with natural stone ▪ Board joint bonding of cassettes in the wood, window and front door area ▪ Expands (foams) during the curing process! ▪ Stair construction and building trade ▪ With many assembly bonding processes ▪ With laying of skirting and laminate ▪ Fixation of struts for double floorings ▪ Thixotropic, does not drop off ▪ Joint filling ▪ Particularly fast reaction time ▪ Fast and homogeneous, full hardening ▪ Very short pressing times ▪ Good adhesion characteristics to several types of wood, and building material, ceramics, metal, duroplast and thermoplastic after appropriate preparation of the surface. ▪ Fixation of signs ▪ Diverse industrial fields ▪ Good bonding strength ▪ Good bonding strength at heat ▪ Good weather-proofness ▪ Can be over-coated with many paint systems ▪ Can subsequently be powder-coated (30 min/+200 °C) ▪ Can be ground when hard-dry Certificates / Test reports ift Rosenheim If wood is glued to wood, it achieves the durability class D4 as per DIN EN 204. Test report No.: 505 28322/1 ift Rosenheim If wood is glued to wood, it achieves a heat resistance as per DIN EN 14257 (WATT 91) of 7.6 N/mm2 Test report No.: 505 28322/2 Dallas Laboratories, Texas, USA Tested as per ASTM D-3498, ASTM C-557 and AFG-01. French VOC-Emission class A+ Technical Data Basis Colour hard-dry medium viscous-pasty Skinning time - dry at +20 °C, 50 % r. H., applied quantity 500 μm-PE/PVC Skinning time - wet at +20 °C, sprayed with water; applied quantity 500 μm-PE/ PVC Functional strength depending on application at +20 °C Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Open the catalog to page 1

Technical Data Sheet 1-C-PUR-Assembly adhesive Curing speed at +20 °C, 50 % r. H. Curing time at +20 °C, 50 % r. H. until it reaches the final strength Applied quantity depending on carrier material Processing temperatures adhesive and substrates Bonding strength at heat as per DIN EN 14257 (WATT 91) General Information Paint the bonded workpieces only after the adhesive has cured completely; if they are painted too early, formation of paint bubbles cannot be excluded. If permanent humidity impact is expected, the bonded joints/bonded surfaces must additionally be sealed/protected using a...

Open the catalog to page 2

Technical Data Sheet 1-C-PUR-Assembly adhesive Due to their variety, age and, if necessary, additional treatment with oil or wax, anodized surfaces do not allow any general statement about wettability or bonding characteristics of these bonding surfaces. If stainless steel is manufactured or processed, auxiliary aids, e.g. wax, oil, etc, are often used, that usually cannot be removed by simple wiping away; it turned out that after the cleaning with solvent-based cleaning agents a clearly better bonding result will be achieved after grinding, or better sand blasting, of the surface and...

Open the catalog to page 3