Catalogs >
Weiss Chemie >
COSMO®HD-200.121

COSMO®HD-200.121
4Pages

Catalog excerpts

Technical Data Sheet Special Properties ▪ Used for bonding and sealing in automotive and vehicle body manufacture ▪ Bonding of leaf-enclosing door panels ▪ Compatible with natural stone ▪ Skirting, laying of laminate and cable ducts ▪ Stair construction and building trade ▪ Bonding of façades (cassette) - sandwich elements ▪ Good adhesion characteristics to different surfaces ▪ Glass bonding in furniture and display cabinet construction ▪ Surface can be smoothed well ▪ Solar systems and wind power plants ▪ Fast and controlled full hardening ▪ High strength of adhesive joints ▪ Apparatus and plant construction ▪ Compensates the expansion of different materials ▪ Diverse industrial fields ▪ Good weather resistance outdoors ▪ elastic adhesive joint ▪ Good UV-stability ▪ Can subsequently be powder-coated (annealing temperatures ≤ +200 °C) Certificates / Test reports GEV *Classified in the EMICODE class EC 2 in compliance with the criterions of the GEV. Licence No.: 12200 French VOC-Emission class A+ Technical Data Mixture COSMO® HD-200.121 (Component A COSMO® HD-201.121 + Component B COSMO® HD-205.101) Basis Colour hard-dry Viscosity Mixture – COSMO HD-200.121 as per plate-plate (2 s ) at +25 °C Mixing ratio parts by volume Processing time with static mixer at +20 °C Functional strength depending on application at +20 °C Curing time at +20 °C, 50 % r. H. to approx. 75 % Curing time at +20 °C, 50 % r. H. until it reaches the final strength Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Open the catalog to page 1

Technical Data Sheet 2-C-STP-Adhesive Operation temperature range -40 °C to +100 °C, temporary (powder coating) to +200 °C Processing temperatures Adhesive and substrates Tensile shear strength as per DIN EN 1465, alu/alu, 0.2 mm joint at +20 °C Tensile shear strength as per DIN EN 1465, alu/alu, 0.2 mm joint at +80 °C Component A COSMO® HD-201.121 Colour Component B COSMO® HD-205.101 Colour General Information The processing times become shorter at +30 °C to approximately half of the time, at +10 °C, they become longer to approx. double of the time. Paint the bonded workpieces only after...

Open the catalog to page 2

Technical Data Sheet 2-C-STP-Adhesive After they have been fit together, the parts must be fixed and pressed until functional strength has been reached. Remove oozing adhesive when it is fresh. After work stoppages, make sure to change the static mixer within the specified time. After the end of work, the used static mixer remains on the cartridge unit; if work starts again, the static mixer is to be replaced. If necessary, remove hardened adhesive from the cartridge nozzle. Now the safety shot, approx. 20 g of adhesive, is required, before bonding can be continued! Bonding of metals Due to...

Open the catalog to page 3

Technical Data Sheet 2-C-STP-Adhesive COSMO® SP-800.230 - Static mixer COSMO® SP-750.150 - Air pressure gun Manual pressure guns COX VBM (MR) 400 X (side.by.side cartridge)* *(Also see information on special dosing guns.) Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Open the catalog to page 4