Catalogs >
Weiss Chemie >
COSMO®HD-100.800

COSMO®HD-100.800
3Pages

Catalog excerpts

Technical Data Sheet 1-C-Hybrid Assembly Adhesive Examples for Application Special Properties ▪ Skirting, laying of laminate and cable ducts ▪ Bonding of mirrors as per Technical regulations of the glazing trade No.11, current edition ▪ elastic adhesive joint ▪ Stair construction and building trade ▪ Compatible with mirror rear sides as per DIN EN 1036 ▪ Glass bonding in furniture and display cabinet construction ▪ Compatible with natural stone ▪ Solar systems and wind power plants ▪ Apparatus and plant construction ▪ Particularly fast reaction time ▪ Automotive and vehicle body manufacturing ▪ Fast touch force for assembly works ▪ Diverse industrial fields ▪ Very good application possibilities ▪ Compensates the expansion of different materials ▪ Good weather resistance outdoors ▪ Good UV-stability ▪ Can subsequently be powder-coated (annealing temperatures ≤ +200 °C) Certificates / Test reports GEV *Classified in the EMICODE class EC1 PLUS in compliance with the criterions of the GEV. Licence No.: 12158 French VOC-Emission class A+ Technical Data Basis Colour hard-dry Viscosity as per cone and plate (2 s-1) at +25 °C Skin formation time - dry at +20 °C, 50 % r. H., applied quantity 500 μm-PE/PVC Curing time at +20 °C, 50 % r. H. until it reaches the final strength Operation temperature range -40 °C to +100 °C, temporary (powder coating) to +200 °C Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Open the catalog to page 1

Technical Data Sheet 1-C-Hybrid Assembly Adhesive Processing temperatures adhesive and substrates Tensile shear strength as per DIN EN 1465, Alu/Alu, 0.2 mm joint at +20 °C General Information With increased air humidity or after the adhesive has been sprayed with water, the skinning time will be clearly shorter. Paint the bonded workpieces only after the adhesive has cured completely; if they are painted too early, formation of paint bubbles cannot be excluded. Bonding of materials with different longitudinal extension must be assessed regarding their long-term behaviour, especially when...

Open the catalog to page 2

Technical Data Sheet 1-C-Hybrid Assembly Adhesive Powder coatings with shares of PTFE cannot be bonded reliably without pre-treatment (e. g. plasma procedure). Important instructions Only instructed personnel in specialist firms are allowed to use the product! For bonding of mirrors strictly observe the Technical regulations of the glazing trade No.11, current edition. For this topic, please also read our Technical Information "Bonding of mirrors". For PVC-bonding, also read our technical information "Testing and evaluation of PVC-bonding with STP/MS adhesives of the product series COSMO®...

Open the catalog to page 3