Technical Data Sheet 1-C-Hybrid Assembly Adhesive Examples for Application Special Properties ▪ Skirting, laying of laminate and cable ducts ▪ elastic adhesive joint ▪ Stair construction and building trade ▪ Window and door construction ▪ Bonding of façades (cassette) - sandwich elements ▪ Compatible with natural stone ▪ Glass bonding in furniture and display cabinet construction ▪ Solar systems and wind power plants ▪ Apparatus and plant construction ▪ Good adhesion characteristics to different surfaces ▪ Automotive and vehicle body manufacturing ▪ High strength of adhesive joints ▪ Diverse industrial fields ▪ Compensates the expansion of different materials ▪ Good UV-stability ▪ Can be over-coated with many paint systems Certificates / Test reports GEV *Classified in the EMICODE class EC1 PLUS in compliance with the criterions of the GEV. Licence No.: 5700 French VOC-Emission class A+ Technical Data Basis Colour hard-dry Viscosity as per cone and plate (10 s-1) at +25 °C Skin formation time - dry at +20 °C, 50 % r. H., applied quantity 500 μm-PE/PVC Curing time at +20 °C, 50 % r. H. until it reaches the final strength Operation temperature range Processing temperatures adhesive and substrates Tensile shear strength as per DIN EN 1465, Alu/Alu, 0.2 mm joint at +20 °C Weiss Chemie + Technik GmbH & Co. KG Hansastraße 2 D-35708 Haiger

Technical Data Sheet 1-C-Hybrid Assembly Adhesive General Information With increased air humidity or after the adhesive has been sprayed with water, the skinning time will be clearly shorter. Paint the bonded workpieces only after the adhesive has cured completely; if they are painted too early, formation of paint bubbles cannot be excluded. Bonding of materials with different longitudinal extension must be assessed regarding their long-term behaviour, especially when they are exposed to fluctuating temperature ranges. Skinning, joining times, as well as the required press and following processing...

Technical Data Sheet 1-C-Hybrid Assembly Adhesive Our user instructions, processing guidelines, product- and performance data, and other technical statements are only general directives; they describe only the condition of our products (values, determination of values on the date of completion) and the performances do not represent a warranty in the sense of § 443 BGB. Because of the wide variety of applications of the individual product and the relevant special conditions (e. g. processing parameters, material characteristics, etc.), it is up to the user to test it itself; our free expert advice...