Catalogs >
Weiss Chemie >
COSMO CA-500.200

COSMO CA-500.200
3Pages

Catalog excerpts

COSMO CA-500.200 ***COSMOFEN CA 12 Cyanoacrylate - Fast-Setting Adhesive Examples for Application ■ Sewage technique ■ Sealing technique ■ Electrical / electronic industry ■ EPDM seals in window, facade, and vitrine construction ■ Vehicle / shipbuilding ■ Household appliances production ■ Plastics / elastomer / rubber processing ■ Leather / shoe industry ■ Medical / dental technology, orthopaedics ■ Metal construction / technical industrial supplies ■ Jewellery industry ■ Optical goods industry ■ Toy industry ■ Advertising techniques / advertising industry ■ Exhibition stand construction Special Properties ■ locks ■ bonds within seconds ■ Short time to reach functional strength for assembly works ■ Good adhesion characteristics to different surfaces ■ Solvent-free ■ Good wetting of the substrate ■ Hard adhesive joint ■ Short fixing times ■ Good UV-stability ■ Highly frost- and heat-resisting Technical Data Basis: Modified cyanoacrylates Viscosity measured by cone and plate (3 000 s-1) at +25 °C approx. 20 mPa.s Functional hardness EPDM/EPDM - profile sealing approx. 5 s WGISS GmbH & Co. KG Fax: +49 (0) 2773 / 815 - 200 HansastraUe 2 Email: ks@weiss-chemie.de

Open the catalog to page 1

Technical Data Sheet Cyanoacrylate - Fast-Setting Adhesive PVC rigid/PVC rigid Softening range Instructions for use The surfaces of the workpieces to be bonded must be dry, and free from dust and grease. Apply the adhesive from the trading unit or by means of a CA-dosing unit onto one side. Immediately after application, the workpieces must be fit together and pressed until they reach the required functional strength. In principle, CA-adhesives cure by means of air and material humidity. This means that ambient conditions, material and condensation humidity on the surfaces to be glued,...

Open the catalog to page 2

Technical Data SheetCOSMO CA-500.200 ***COSMOFEN CA 12 Cyanoacrylate - Fast-Setting Adhesive variety of applications of the individual product and the relevant special conditions (e. g. processing parameters, material characteristics, etc.), it is up to the user to test it itself; our free expert advice for application provided in speech, writing, and as test is nonbinding. Please, also consider the Safety Data Sheet! Cleaning Remove the fresh, not cured adhesive from the surfaces and the tools using COSMO CL-300.150. Cured adhesive can only be removed mechanically. Storage Store original...

Open the catalog to page 3