SPM ® Flow Control Products - 65 Pages

Add to MyDirectIndustry favorites
SPM ®  Flow Control Products

Catalog excerpts

SPM® Flow Control Products Catalog FLOW CONTROL TECH CATALOG 1

 Open the catalog to page 1

Table of Contents 3 GENERAL CORPORATE OVERVIEW CORPORATE PROFILE QUALITY, HEALTH, SAFETY AND ENVIRONMENT (QHSE) SYSTEMS GLOBAL FOOTPRINT & SERVICES 5 GENERAL PRODUCT OPERATION NOTES 5 THIRD PARTY CERTIFICATIONS 6 GENERAL MAINTENANCE AND USE NOTES 6 6 6 6 6 GENERAL USAGE GENERAL MAINTENANCE INSPECTION - REPAIR - TESTING RECOMMENDED STORAGE PRODUCT FLOW RATES PERSONAL RESPONSIBILITIES ON LOCATION SPECIAL PRECAUTIONS 10 SWIVELS 11 SPM SWIVEL CONFIGURATIONS 12 SWIVEL SPECIFICATIONS 15 RECOMMENDED SWIVEL GREASE PROCEDURE ® 1” X 2” 1” X 2” PLUG VALVE SPECIFICATIONS 2” PLUG VALVE (STANDARD) 2”...

 Open the catalog to page 2

Table of Contents (continued) 38 BALL INJECTORS 61 OTHER SAFETY PRODUCTS 38 BALL INJECTOR SPECIFICATIONS 40 INTEGRAL CONNECTIONS & PIPE 40 INTEGRALS - LATERALS - TEES - WYES - ELLS - CROSSES PIPE - NPS PIPE - INTEGRAL PIPE AND CROSSOVERS 51 HAMMER UNIONS 52 EXL WING NUT 53 BULL PLUGS & GAUGE PLUGS 54 SAFETY IRON SPM® TRAILER FLOW RATE ASSEMBLY SPECIFICATIONS 58 MANIFOLD SKID FLOW LINE SAFETY RESTRAINT 59 (FSR) SYSTEM 60 SPM® RENTAL PROGRAM 63 ASSET MANAGEMENT PROGRAM (A.M.P .

 Open the catalog to page 3

General Corporate Overview Corporate Profile The Weir Group, founded in 1871 and headquartered in Scotland, is a well-established global engineering group, focused on delivering engineering solutions to the oil and gas, minerals, and power sectors. Weir's Pressure Pumping team is a market leader in well service pumps and high pressure flow control equipment. Their line of SPM® reciprocating plunger pumps is used in various applications including fracturing, cementing, and acidizing. The expanding flow control product line features products used to safely transport fluids at high pressure...

 Open the catalog to page 4

Where You Need Us. When You Need Us. SPM® FLOW CONTROL PRODUCT CATALOG

 Open the catalog to page 5

General Product Operation Notes Service Types: ••Standard Service − Alternative seals available for harsh services (chemicals, acids, etc.) − Not intended for exposure to H2S. ••H2S (Sour Gas) Service − These assemblies are manufactured from tempered alloy (HSLA) steel and are in accordance with NACE MRO175 regarding allowable hardness and alloy concentration. These products are suitable for use with H2S. WARNING: Exposing standard service components to H2S may result in rapid catastrophic failures, which may lead to SERIOUS BODILY INJURY, DEATH, OR PROPERTY DAMAGE. Due to this risk, it is...

 Open the catalog to page 6

General Maintenance and Use Notes General Usage ••Most SPM® products generate, control, or direct pressurized fluids; therefore, it is critical that those who work with these products be thoroughly trained in their proper application and safe handling. It is also critical that these products be used and maintained properly. ••Use of the proper tools is necessary when servicing SPM® treating iron. Service personnel must be knowledgeable and trained in the use and handling of tools for all maintenance. Operating and Maintenance Instruction Manuals should be consulted before operating any...

 Open the catalog to page 7

General Maintenance and Use Notes (continued) Product Flow Rates The following reference chart lists the maximum recommended flow rate by product family. The maximum flow rate is calculated based on internal diameter of the product from the factory and a maximum velocity of 42 feet per second. The published rates are applicable for both standard and H2S service products. Product Family Pipe (NPS - Hammer Union) Pipe (NPS - Safety Iron ) Pipe (Integral Pup Joints - Hammer Union) Pipe (Integral Pup Joints - Safety Iron ) ® Pipe (Integral Crossovers - Hammer Union) Pipe (Integral Crossovers -...

 Open the catalog to page 8

General Maintenance and Use Notes (continued) Product Family Clapper Check Valve (Hammer Union) 4” 15K Dart Check Valve (Hammer Union) Clapper Check Valve (Safety Iron ) ® 4” 1502 Swivel (Safety Iron ) 3” 1502 Swivel (Hammer Union) Note: Other parts or configurations may be available. Contact Weir for specific details. Product availability and specifications are subject to change at any time, with or without notice.

 Open the catalog to page 9

General Safety Guide Personal Responsibilities: ••When using SPM® flow control products appropriate Personal Protective Equipment (PPE) is required, including, at a minimum, safety glasses, approved safety shoes, and hard hat. Hammering and lifting must be done with caution. ••Personnel should only hammer on union lugs and not strike the union nut or valve body. Fractures can occur from repeated misuse. Excessive hammering can damage components. ••Proper leg lifting should be used when lifting. Back lifts should be avoided. ••Do not hammer on any SPM® product when pressure is present. On...

 Open the catalog to page 10

Swivels SPM® swivels are available in 2” through 4” sizes and in pressure ratings up to 15,000 psi. All SPM® swivels feature uniform wall thickness throughout for consistent flow of fluids and extended life. Designed for optimized distribution of material for female ball race components, the ball bearing connection of SPM® swivels are robust while providing consistent rotation. The 3” 1502 swivels and 4” 1002 swivels are gauged during manufacturing to enable them to pass a 2.5” and 3.5” frac ball respectively. SPM® swivels are available in a wide variety of “styles” providing optimal...

 Open the catalog to page 11

Swivels (continued) SPM® Swivel Configurations Style 10 - Safety Iron® Style 100 - MxF SPM® FLOW CONTROL PRODUCT CATALOG

 Open the catalog to page 12

Swivels (continued) Swivel Specifications A Style 10 - Safety Iron® STYLE 10 SWIVELS Size Service Type Part Number Note: Other parts or configurations may be available. Contact Weir for specific details. Note: Listed weights are approximate. Note: C.E.* - Contact Engineering STYLE 20 SWIVELS Nominal Size Service Type Part Number Note: Other parts or configurations may be available. Contact Weir for specific details. Note: Listed weights are approximate. Note: C.E.* - Contact Engineering

 Open the catalog to page 13

All WEIR Oil & Gas catalogs and technical brochures

  1. Novatech ®

    1 Pages

  2. IL-DSIL

    2 Pages

  3. R MAK

    5 Pages

  4. R GN

    2 Pages

  5. SPM General

    40 Pages

  6. Vacuum Pumps

    2 Pages

  7. APS Brochure

    4 Pages

  8. LW PV

    2 Pages

  9. Frac Head

    2 Pages

  10. Cement Head

    2 Pages

  11. AHP brochure

    2 Pages

  12. DDH brochure

    2 Pages

  13. AXD brochure

    2 Pages