Catalogs >
WEIMA Maschinenbau GmbH >
W5 series | Single-shaft shredder

W5 series | Single-shaft shredder
8Pages

Catalog excerpts

W5 SERIES SINGLE-SHAFT SHREDDERS

TECHNICAL HIGHLIGHTS Easy machine operation thanks to PLC control with large touch panel Master the most difficult materials effortlessly with the universal V rotor Measuring 500 mm in diameter and up to 2,200 mm in length, the V rotor of the W5 series was designed for ambitious throughput targets with high flexibility. Thanks to its innovative design, even large start-up lumps, hollow bins and very voluminous parts pose no problem. WEIMA's latest shredder generation also uses only the latest technology in a compact space for the control cabinet. The shredder, as well as the peripherals –...

Open the catalog to page 2

Convenient maintenance and optimum rotor access thanks to generously sized inspection flap The most striking feature of the W5 machines is certainly the built-in inspection flap. As soon as the swing ram is secured in its upper starting position, the wide access from the rear can be opened hydraulically. You are now in the middle of the cutting chamber and have plenty of space to remove foreign matter from the rotor or to carry out maintenance work at a comfortable working height. Optimized material feed through innovative swing ram The W series from WEIMA is characterized by its...

Open the catalog to page 3

TECHNICAL HIGHLIGHTS HIGH-TORQUE OR HYDRAULIC DRIVE? You have the choice Depending on the application, we offer two heavy duty drive concepts: The hightorque drive with a high-torque, multi-pole synchronous motor is produced by Baumüller in Germany and is distinguished by its insensitivity to foreign materials. Without a gearbox, the drive withstands shocks and vibrations and thus has a particularly long service life. The Hägglunds / Bosch Rexroth hydraulic actuator is very responsive – at a low connected load. Stopping, starting, and reversing is possible even under full load. Speed and...

Open the catalog to page 4

W5.18 Film recycling with metal detection and extrusion W5.18 perfectly integrated with hydraulic drive W5.22 elevated placement in recycling line W5.18 with conveyor belt discharge W5.14 with discharge conveyor belt

Open the catalog to page 5

TECHNICAL DATA AND MACHINE CONFIGURATION Technical data W5 series Rotor length [mm] Rotor speed [rpm] Drive power [kW] Available knife sizes [mm] Particle size [mm] Hopper opening [mm] Length [mm] Width [mm] 1) dependent on cutting circle ) dependent on specific drive configuration 2 3) dependent on drive technology 4) dependent on machine configuration 5) in stan

Open the catalog to page 6

• Standard • Optional Machine configuration single-shaft shredder Segmented edge swing ram Turbo hydraulics Electromechanical drive Hydraulic drive High-torque drive Hydrodynamic start-up clutch Special rotor Adjustable counter knife Vautid rotor wear protection Rotor cooling Detached bearings Lift-up screen Conveyor belt cutout Inspection flap Vibration damping machine feet Control cabinet with PLC control MATERIAL FEED CUTTING GEOMETRY

Open the catalog to page 7