WLH SERIES HORIZONTAL SHREDDERS

TECHNICAL HIGHLIGHTS Optimal shredding results with energy-efficient Siemens PLC control system The Siemens PLC control system installed in the separate control cabinet regulates all processes of a horizontal shredder and can be individually configured for each application. This guarantees consistently high-quality throughput material of homogeneous size – ideal for further processing. If required, horizontal shredders can of course also be integrated into a fully automatic production line. Powerful and low-maintenance drive via electric motor and V-belt An electromechanical drive with V-belt...

ROBUST MACHINE DESIGN including offset rotor bearings WEIMA horizontal shredders are not only particularly compact, but above all, robustly built. Rotor bearings that are offset from the machine frame are insensitive to dust, easy to maintain and durable.

TECHNICAL HIGHLIGHTS Homogeneous material sizes thanks to exchangeable screen with round holes Screwed underneath the rotor is a round hole screen, which can be replaced as required by a screen with a larger or smaller hole diameter in the range 10 - 80 mm. Material is shredded by the rotor until it fits through the hole openings, falls through, and is finally suctioned off. This guarantees a particularly homogeneous material for each individual requirement. Achieve high throughput rates with innovative V rotor and feed roller The cutting geometry of a shredder has a significant influence on...

SAFE MATERIAL FEEDING OF LONG PARTS via horizontal vibratory conveyor While the Beaver machines are fed directly via a manual inclined feeder, the WLH and Tiger shredders use a vibrating infeed conveyor to feed the material. It is available in various lengths (up to 40 m) and transports long strips, profiles or pipes to the infeed roller located in front of the rotor. The roller picks up the material to be shredded and transports it horizontally to the rotor, where it is shredded between the cutting knives and counter knives. The horizontal machine design simplifies material handling of long...

SEAMLESS INTEGRATION INTO PRODUCTION LINES through automated operating mode If you want to increase efficiency in production, you also need to keep an eye on and optimize waste management. Horizontal shredders are ideally suited for use in state-of-the-art production lines thanks to their compact design and the availability of all data interfaces commonly used today. In addition, they can be operated fully automatically. Modern shredders not only reduce the volume of waste and improve material flow without manual intervention, but also reduce the cost of intralogistics. In addition, your shop...

TECHNICAL DATA Technical data horizontal shredders Feed opening length [mm] Feed opening height [mm] Width with one infeed roller [mm] Width with two infeed rollers [mm] Other variations, special equipment, and technical modifications availa

WEIMA Maschinenbau GmbH | weima.com Bustadt 6–10 | 74360 Ilsfeld (Germany) | Phone: +49 (0)70 62 95 70-0 | Fax: +49 (0)70 62 95 70-92 | [email protected] Subject to technical changes | 01082021