Catalog excerpts
WEIMA PUEHLER E SERIE ENTWÄSSERUNGSPRESSEN
Open the catalog to page 1TECHNICAL HIGHLIGHTS Easy installation and commissioning thanks to Plug-and-Play solution To make the start as comfortable as possible, all presses of the PUEHLER E series are delivered pre-programmed and ready for operation as a plug-and-play solution. For the installation, only a power and water connection is required. On request, we also offer the setup and commissioning of the machine (including training) via digital channels. By default, only food grade hydraulic oil is used in PUEHLER machines. If required, a customer-specific hydraulic oil can also be used. Simple operation and fast...
Open the catalog to page 2INCREASED DISCHARGE HEIGHT OF DISCS for flexible discharge into containers The inclined discharge pipe allows the formed discs to be discharged at an elevated level – directly into a large bin or tipping trough. This saves the use of a conveyor belt. Depending on requirements, the discharge pipe can be configured straight, to the left or to the right. Ready for multi-shift operation Automatic operation without worries thanks to sensors in the feed hopper Thanks to level sensors in the feed hopper, the press can be used automatically. The machine switches on automatically when a certain...
Open the catalog to page 3TECHNICAL HIGHLIGHTS Good accessibility for cleaning and maintenance due to flexible installation and maintenance hatch Thanks to brakable rollers, the E series machines can be used flexibly during operation. This ensures optimum access to the machine also during cleaning and maintenance. A maintenance and cleaning hatch on the hopper facilitates access to the inside of the machine. E ROBUST HYDRAULIC CONSTRUCTION against foreign materials The most important components of the hydraulic unit have been designed particularly generously to always have a buffer to fall back on, even under full...
Open the catalog to page 4Maximum safety during loading due to curved hopper design The curved hopper prevents cans or other materials from escaping from the machine during the pressing process due to the enormous pressing force. In addition, the curved shape facilitates cleaning and prevents uncontrolled spraying of pressed-out liquid from the filling opening. Plastic bottles (P ET, P (liquid, wrapp ed in P, PE, plas tic fi etc.) lm Pla w vegetables, pasta) ese, ra t che / / f a/so rell zza mo g. (e. Cardb oard wrapped with film
Open the catalog to page 5TECHNICAL DATA AND MACHINE CONFIGURATION Residual moisture Space requirement (L × W × H) [approx. mm] 1) depending on material ) detailed dimensions upon request 2 Technical data PUEHLER E series
Open the catalog to page 6Stainless steel centrifugal pump (at drain pan) Stainless steel pump including level probe Screw pump (at drain pan) Level sensors Quick couplings Hydraulic press stamp Cutting plate on press stamp • Standard • Optional Machine configuration PUEHLER E series MATERIAL FEED Hopper 220 l MATERIAL DISCHARGE Aluminum hydraulic tank (40 l) ELECTRICAL Control cabinet with Siemens PLC control Electrical connection for accessories Other variations, special equipment and t
Open the catalog to page 7WEIMA Maschinenbau GmbH | weima.com Bustadt 6–10 | 74360 Ilsfeld (Germany) | Phone: +49 (0)70 62 95 70-0 | Fax: +49 (0)70 62 95 70-92 | info@weima.com Subject to technical changes | 01082021
Open the catalog to page 8All WEIMA Maschinenbau GmbH catalogs and technical brochures
-
WEIMA Single-shaft shredders
76 Pages
-
WL 4 | Single-shaft shredder
8 Pages
-
C series | Briquette presses
8 Pages
-
WL 6 | Single-shaft shredder
8 Pages
-
WL 4 | Single-shaft shredder
8 Pages
-
WL 8 | Single-shaft shredder
8 Pages
-
WL 4 | Single-shaft shredder
8 Pages
-
HD 500 | HD 700K | HD 1500
4 Pages
-
TH 1500 | TH 2800 | TH 3400
5 Pages
-
TH 3400 – Briquette Press
5 Pages
-
C 140 – Briquette Press
4 Pages
-
SPIDER HRS-SERIES
8 Pages
-
Series WSM Granulators
2 Pages
-
WLK
5 Pages
-
Briquetting presses
8 Pages
-
Series WT
2 Pages
-
Granulator
2 Pages
-
Four-shaft shredder
2 Pages