TH STANDARD SERIES BRIQUETTE PRESSES

TECHNICAL HIGHLIGHTS Precise cylinder control thanks to contactless proximity switches Low-wear pressing process thanks to wear sleeve and plates To minimize unavoidable wear during the briquetting process, WEIMA uses easy-to-change PU plates bolted to the The cylinders are controlled electrically via a no-contact proximity switch. The limit switches are located at the front and rear positions, so movements are very precise and maintenance costs are low due to low wear. filling cylinder for pre-compaction in the filling tower. In addition, a specially hardened inlay, the so-called wear sleeve,...

READY FOR MULTI-SHIFT OPERATION thanks to optional oil cooling Different hopper sizes for every application For briquette presses of the TH Standard series you have the choice between three hopper sizes: 1,040 x 1,040 mm, 1,400 x 1,400 mm or 2,000 x 2,000 mm for particularly large buffer volumes. The pressing and hydraulic unit can be installed on the left or right side of the machine, depending on requirements. To produce briquettes in automatic mode, the feed hopper can also be equipped with a fill level monitoring system. With its help, the machine switches off automatically when the filling...

TECHNICAL HIGHLIGHTS Uniform, high-quality briquettes due to briquette length monitoring The length of the briquettes produced can be adjusted individually, from half the diameter to 1.5 times the diameter. The supplied standard briquette length monitoring with proximity switch ensures that the briquette length always remains constant – even with changing material flows. LOW-IMPACT OPERATION Dust-reduced pre-compaction thanks to end-position cushioned hydraulic cylinders thanks to closed system The loose material is pre-compacted vertically by a filling slide in the filling tower, which results...

User-friendly operation thanks to Siemens PLC control Temperature-monitored hydraulic unit for long service life To live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known brand components. This guarantees the highest quality with a compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. The hydraulic unit has a separate oil tank with pump motor and complete valve control. The compact design right next to the material hopper makes the entire briquetting...

TECHNICAL DATA AND MACHINE CONFIGURATION Technical data TH Standard series Hydraulic oil charge [liter] Briquette diameter [mm] Throughput rate up to [kg/h] Space requirement (L × W × H) [approx. mm] 1) depending on material ) depending on hopper size 2 3) detailed dimensions

Machine configuration TH Standard series Press mechanics with hydraulic cylinder Briquette length monitoring Connecting piece to pre-compactor Central lubrication system Pressing chamber wear sleeve Chrome plated clamp Hydraulic power unit with 160 l tank Hydraulic power unit with 250 l tank Safety switch for oil temperature Vario option (different hose lengths) On-off automatic switch with level limit Inspection cover with limit switch Reinforced agitator gear motor Sheet metal hopper cover Hopper corners and cone plates ELECTRICAL Control cabinet with

WEIMA Maschinenbau GmbH | weima.com Bustadt 6–10 | 74360 Ilsfeld (Germany) | Phone: +49 (0)70 62 95 70-0 | Fax: +49 (0)70 62 95 70-92 | [email protected] Subject to technical changes | 01082021