TH STANDARD S SERIES BRIQUETTE PRESSES 01 |

TECHNICAL HIGHLIGHTS Large material hopper for more buffer volume The galvanized hopper, into which the material to be briquetted is fed either manually via a conveyor belt or a screw conveyor, is equipped with a rotating agitator and a discharge screw at the bottom. It is available in dimensions of 1,400 x 1,400 mm or 2,000 x 2,000 mm, depending on the required buffer volume. The machine can be used in automatic mode by means of fill level monitoring. Highly compressed round briquettes thanks to reliable toggle-joint mechanism By using a so-called toggle lever mechanism, a significantly higher...

Convenient operation with advanced Siemens PLC control We manufacture all briquetting press control cabinets ourselves in our German plants in Ilsfeld, Abstatt and Annaburg. For this purpose, we use only brandname components – and this also applies to our machine control system. The high-quality Siemens PLC control system with touch display optimally coordinates the components with each other, which makes it possible to achieve a consistently high briquette quality. LONGER BRIQUETTING, MORE PRESSING CYCLES with large hydraulic oil tank and large pressing mechanism The larger the hydraulic tank,...

TECHNICAL HIGHLIGHTS Rectangular briquettes in retail quality The TH 1200 is the only machine with clamp technology that produces rectangular briquettes measuring 150 x 60 mm with variable lengths. These can be ideally stacked, packed and then sold profitably. The voluminous hydraulic unit allows multishift operation with high throughput rates. Highly compressed briquettes are produced with the aid of a generously dimensioned clamping cylinder. Non-stop briquetting thanks to standard oil cooling TH Standard S machines are equipped with hydraulic oil cooling as standard. This allows the briquetting...

Even higher throughput rates with the Duo, Trio or Quattro version To further increase the throughput and availability of a machine, briquetting presses of the TH Standard S series can be optionally equipped with additional screw conveyors and pressing mechanisms. The hopper size remains the same. This saves space that would otherwise have to be used for another machine. Dust-reduced compression for more safety and cleanliness Briquetting is carried out without the addition of adhesives or binders, which makes subsequent use for energy purposes harmless. Thanks to a closed pressing system, the...

TECHNICAL DATA AND MACHINE CONFIGURATION Technical data TH Standard S series Briquette shape and size [mm] Hydraulic oil volume [liter] Weight [approx. kg] Space requirement (L × W × H) [approx. mm] 1) depending on material ) detailed dimensions u

Machine configuration TH Standard S series • Standard  • Optional  MECHANICS Press mechanics with clamp cylinder Briquette length monitoring Connecting piece to pre-compactor Central lubrication system Pressing chamber wear sleeve Chrome plated clamp Hydraulic power unit with 600 l tank Safety switch for oil temperature Vario option (different hose lengths) On-off automatic with level limit switch Inspection cover with limit switch Reinforced agitator gear motor Sheet metal hopper cover Hopper corners and cone plates Stable base frame on rubber feet Drain pan with pump sump ELECTRICAL Control...

WEIMA Maschinenbau GmbH | weima.com Bustadt 6–10 | 74360 Ilsfeld (Germany) | Phone: +49 (0)70 62 95 70-0 | Fax: +49 (0)70 62 95 70-92 | [email protected] Subject to technical changes | 01082021 | 07