Condor VC
4Pages

Condor VC www.weiler.de Service Manual/Semi-CNC Lathes The New WEILER: The Next Step Forward Conventional Precision Lathe Cycle-Controlled Lathes CNC Lathes Radial Drilling Machines Long-term precision and operating convenience

Condor VC Headstock Bed, subbase and sliding cover The bed is manufactured from highquality grey cast iron. Strong transverse ribbing and continuous guides ensure resistance to bending and torsional forces. The separate vee and flat guides for the carriage and tailstock are flamehardened and ground. The bed is bonded to the generously dimensioned sheet steel base to further enhance the absorption properties of the complete construction. Located in the base are the drives, electrics, the optionally available coolant system as well as a large lockable cabinet for the secure storage of collets...

The advantages of the conventional range are ultimate precision and operating convenience as well as refined technology. Standard Design Sliding cover over the entire machine length Central arrangement of all operating elements except for activation of spindle speed and feed Easy, quick and well arranged operation Entry of feed, thread, spindle speed and constant surfaces speed data via the operating panel of the DRO User defined data values within the indicated ranges Resolution 0.001 mm Without change gears Extremely smooth running Low noise level Tailstock To enable fine tapers to be...

Technical variations reserved · 06/10 · 5.0915.01.11.01.02 Service Technical Data Working Range mm 800 Centre height mm 180 Swing over bed Radial Drilling Machines Distance between centres mm 360 Swing over cross slide mm 190 Travel of cross slide mm 205 Bed width mm 260 Tool shank cross section mm 25 x 25 Main Spindle Spindle nose according to DIN 55027 size 6 Spindle diameter in front bearing mm 90 Spindle bore mm 56 Taper bore similar to DIN 228 MT 6 Main Drive Drive power kW 13 Speed range rpm 30 – 3500 Number of gear steps 1 Number of spindle speeds inf. variable Feed and thread...