Commodor
2Pages

Commodor Commodor AC Commodor 230 Commodor 230 AC 1,000 Working Range mm 1,000 1,000 1,000 Centre height mm 180 180 230 230 Swing over bed Radial Drilling Machines Distance between centres mm 380 380 475 475 Swing over cross slide mm 190 190 270 270 Main Spindle Spindle nose according to DIN 55027 size 6 6 6 6 Spindle diameter in front bearing mm 90 90 90 90 Spindle bore mm 56 56 56 56 Taper in spindle nose MT 6 6 6 6 Main Drive Drive power at 100 % ED kW 4 5.5 7.5 11 Speed range rpm 25-2,000 25-2,000 13-2,000 25-2,000 Number of gear steps 9 4 12 4 Power shift gear – – two-step – 18 inf. variable 24 Radial Drilling Machines Technical Data Service Long-term precision and operating convenience Technical variations reserved · 04/10 · 5.0915.01.07.02.02 Service Technical Data inf. variable Number of spindle speed Feed Range Number of feeds 200 200 320 320 Longitudinal mm/rev. 0.022-0.8 0.022-0.8 0.028-8.2 0.028-8.2 Transverse mm/rev. 0.011-0.4 0.011-0.4 0.014-4.1 0.014-4.1 Thread Cutting Range 0.3-80 0.3-80 80-2.75 80-0.375 80-0.375 Quill travel mm 150 150 150 150 Quill diameter mm 60 60 70 70 Quill taper to DIN 228 MT 4 4 4 4 kg 1,600 1,700 1,900 1,800 Tailstock Weight (without packing and optional accessories) Standard Equipment Commodor and Commodor 230 • Roller protection for leadscrew and feed rod • Tailstock with pressure relief • Brake device for main drive • Socket for machine lighting 230 V • Taper bush MT6 / MT4 • Male centre MT4 • Multisuisse quick-change toolpost size B • Toolholder BD 25140 • Chip tray • Chuck guard with limit switch monitoring • Rear splash guard (Commodor) • Partial machine guarding (Commodor 230) • Chip deflector • Bed stop • Set of change gears 33-56-88-120 • Coolant attachment • 5 Shear pins for leadscrew and change gears • Central lubrication • Set of wrenches • Instruction manual with spare parts list • Machine card • NCS enamel Standard Equipment Commodor AC and Commodor 230 AC • Roller protection for leadscrew and feed rod • As mentioned however including partial machine guarding and spindle speed display Optional Accessories Commodor, Commodor AC and Commodor 230, Commodor 230 AC • Rotating centres • Follower rests with sliding jaws • Steady rests with roller or sliding jaws • I.D. back stops • Three and four jaw chucks • Independent four jaw chucks • Collet clamping attachments • Limit switch device for thread cutting • Machine lightings • Digital readouts • Constant cutting speed (only AC) • Further accessories on request Electrical Equipment Commodor and Commodor 230 • Working voltage 400 V AC 3 PH N/PE/50 Hz • Control voltage 230 V AC • Magnetic disk brake for main spindle stop • Contactor control in lockable switch cabinet • All safety relevant components are electrically interlocked • Restart protection in case of voltage loss or emergency stop • Two-speed main motor IP 54 with overload protection and temperature sensor • Emergency stop at headstock and subbase • Socket for machine lighting 230 V AC Electrical Equipment Commodor AC and Commodor 230 AC • As mentioned however AC drive with force-ventilated main motor, frequency converter, magnetic disk brake and spindle speed potentiometer for infinitely variable speed adjustment and speed display Model Commodor AC Conventional Precision Lathes Commodor, Commodor AC and Commodor 230, Commodor 230 AC www.weiler.de WEILER Werkzeugmaschinen GmbH Mausdorf 46 • D-91448 Emskirchen Telephone +49 (0)9101-705-0 Fax +49 (0)9101-705-122 info@weiler.de • service@weiler.de www.weiler.de CNC Lathes 0.3-10 80-2.75 Cycle-Controlled Lathes 0.3-10 TPI Conventional/Servo-Conventional Lathes Cycle-Controlled Lathes Conventional/Servo-Conventional Lathes mm Inch threads CNC Lathes Metric threads

Commodor, Commodor AC and Commodor 230, Commodor 230 AC The advantages of the conventional range are ultimate precision and operating convenience as well as refined technology 4/4 Standard Design Main Spindle The extremely sturdy, case-hardened main spindle has been designed to ensure high dynamic rigidity. The high precision double taper roller bearing at the front and the adjustable double-row cylinder roller bearing at the rear guarantee high quality surfaces, quiet running and excellent turning performance. Apron The apron is fully enclosed and also serves as the central lubrication...