Introduction
SWATYCOMET introduces a new line of vitrified bonded CBN abrasives designed for grinding complex tool parts. These products aim to reduce machining costs and improve the efficiency of grinding difficult materials.

Specifications
- Grinding Type: External cylindrical
- Grinding Wheel Dimensions: 400 x 25 x 6 x 127
- Composition: B126 M6V3 C100
- Machined Material: Vanadis 10 SC

Applications
The abrasives are suitable for grinding high alloy tool parts used in machining plastics, sheet metal, styrofoam, and thermoforming, with hardness up to 70 HRC. They are also applicable for materials like OCR12 VM, titanium alloys, K340, V2000, V10, and M330.

Dimensions
- Continuous type: Diameters from 3 mm to 500 mm
- Segmental type: No diameter limitations

Recommendations
- Internal Grinding: B126 J7V1 C100
- External Grinding: B126 M6V3 C100
- Flat Grinding: B126 M6V3 C100
- Coordinate Grinding: B126 K6V1 C100

Advantages
The SWATYCOMET CBN-V SPECIAL abrasives offer reduced machining costs, effective grinding of difficult materials, minimal dressing strokes, shorter grinding times, and lower grinding forces.

Contact Information
SWATYCOMET, Titova cesta 60, 2000 Maribor, Slovenia
Phone: +386 (0)2 3331 600, (0)3 7575 000
Fax: +386 (0)2 3331 790, (0)3 7575 100
Website: www.swatycomet.si
Email: [email protected]

Performance Comparison
A comparative calculation for 100 units shows that the CBN B126 M-V reduces consumed time from 33 to 17 hours and costs from 1258 EUR to 620 EUR compared to the standard C220-V.