® WEICONLOCK em yst New S nPe gn esi t. Pa R 884 59 001 Anaerobic Adhesives and Sealants D • locking • retaining • sealing • gasketing • easy application • clean processing • better dosing

The ideal solution for construction, production and maintenance: • one-component • fast curing • ready-to-use • solvent-free • non-shrinking • vibration-proof Locking of stud bolts at a car engine with WEICONLOCK AN 302-70 WEICONLOCK products are high quality anaerobic adhesives and sealants on the basis of special methacrylate resins, especially made for economical threadlocking, retaining and sealing of threaded, cylindrical and pipe assemblies. The characteristic feature of WEICONLOCK is the curing in contact with metal while deprived of air. It provides a shock- and vibration-resistant joint...

General Information In general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on 'as received' parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use WEICON Cleaner S). If required, the parts should be slightly roughened. WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On pressfitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. In the case of threaded...

6 Features low strength low viscosity low strength medium viscosity Threadlocking medium strength DVGW²-approval medium viscosity medium strength Threadlocking low viscosity medium strength Threadlocking medium viscosity Threadlocking medium strength KTW1/DVGW2 approval higher viscosity high strengh Threadlocking medium viscosity Threadlocking for passive high strengh materials medium viscosity solid Threadlocking higher viscosity Locking of threads and stud high strengh bolts medium viscosity Locking of threads and stud high strengh bolts medium viscosity Locking of threads and stud high strengh...

• stud bolts WEICONLOCK meets the complex demands required in threadlocking today. With conventional methods (e.g. spring ring, counter-nuts), breakaway forces are absorbed on only 40% of the mating surfaces. Threaded connections locked with WEICONLOCK instead have a higher breakaway torque. As a liquid, WEICONLOCK completely fills the voids and convolutions of threads to ensure 100% contact between the interfaces, thus preventing fretting corrosion at the same time. Due to its sealing properties, WEICONLOCK allows to use through-holes instead of blind tapped holes and helps to ensure specific...

Field of Application: Retaining cylindrical assemblies Field of Application: Flange sealing, gasketing • shaft / hub-connections • coupling hubs, pulleys, bearings • cylindrical parts; slip-, press- or shrunk-tted • anges • cases • lids ange gearwheel WEICONLOCK shaft WEICONLOCK WEICONLOCK retaining adhesives ll the voids on smooth mating surfaces and thus provide total contact of the parts. Additional securing (e.g. by keys) will not be necessary and fretting corrosion will be avoided. Further applications: Retention of ball-, roller- and slide bearings, bushes, bolts, liners, keys, splines...

Anaerobic Adhesives and Sealants • locking • retainig • sealing • gasketing em yst New S nPe gn esi t. Pa R 884 59 001 D Threadlocking at a stainless-steel pump with WEICONLOCK AN 302-43 Threadlocking at ngersplints with WEICONLOCK AN 302-70 Head ofce: WEICON GmbH & Co. KG Königsberger Str. 255 • DE-48157 Münster Postfach 84 60 • DE-48045 Münster Tel. +49 (0) 251 / 93 22-0 Fax +49 (0) 251 / 93 22-244 • Fax +49 (0) 251 / 93 22-233 Export www.weicon.de • [email protected] Flange sealing on industrial pumps with WEICONLOCK AN 305-74 Threadlocking with WEICONLOCK AN 302-70 The specications and recommendations...