New Pen-System ® WEICONLOCK transparent Any product specifications and recommendations given herein must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do warrant the continuously high quality of our products being free from defects in accordance with and subject to our General Sales Conditions. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. ® WEICONLOCK are one-component anaerobic adhesives /sealants, especially made for metal assembly parts. WEICONLOCK remains liquid as long as it is in contact with air. Curing does not start until the adhesive on the jointed parts comes into contact with metal and is deprived of air. In threaded joints, for example, WEICONLOCK completely fills the threads, thus creating the largest possible surface contact. WEICONLOCK is a fast, reliable and economical product for retaining, sealing and gasketing all kinds of threaded cylinders or flanged joints. WEICONLOCK is also available in transparent now and can be applied wherever a coloured adhesive and sealant should not or may not be used for optical reasons or where it is unsuitable for the design. AN 302-40 Threadlocking, medium viscosity, medium strength AN 302-50 Threadlocking, medium viscosity, high strength AN 306-00 Retaining cylindrical assemblies, medium viscosity, high strength AN 306-50 Retaining cylindrical assemblies, higher viscosity, medium strength Instructions for use: Apply WEICONLOCK evenly and avoid direct contact between dispensing tip and metal parts. Apply WEICONLOCK around the thread at screws and bolts. Do not pour back into the Pen any WEICONLOCK liquid which has been in contact with metal; even smallest metal particles may cause the content to cure. Packaging: All 4 new transparent WEICONLOCK types are available in the packaging sizes 20 ml, 50 ml and 200 ml Pen-System. For detailed information, please ask for our special catalogue WEICONLOCK. WEICON GmbH & Co. KG WEICON Middle East L.L.C. Königsberger Str. 255 • DE-48157 Münster P.O.B. 8460 • DE-48045 Münster • Germany Phone +971 4 880 25 05 Fax +971 4 880 25 09 Tel. +49 (0) 251 / 93 22-0 Fax +49 (0) 251 / 93 22-233 Export Mobile +971 50 545 99 83 P. O. Box 118216 • Dubai – U.A.E [email protected] • www.weicon.de Jebel Ali Ind Area 3 • Warehouse No. 17 Distributed by: