Urethane Flexible Casting and Coating Resin with high impact strength and abrasion resistance Prospekt_Urethan englisch.indd 1 29.06.2009 13:16:39

WEICON Urethanes are 2-component polyurethanes that cure at room temperature to tough rubber-like materials, remaining flexible at temperatures down to WEICON Urethanes adhere to a variety of materials such as metals, concrete, rubber, wood, fibreglass and many others. They are also suitable as flexible coatings in connection with WEICON Plastic Metal (epoxy) systems. Due to their low sensitivity to humidity they can also be used for coatings in thin layers and have a remarkably high tensile and tear strength. • Vibration dampers • Assembling jigs • Flexible seals • Foundry patterns and forms...

The surfaces must be clean, dry and degreased. Almost every surface soiling like oil, grease, dust and dirt can be removed with WEICON Surface Cleaner or WEICON Sealant and Adhesive Remover (old paint residues). If the surfaces are badly soiled or smooth, the adhesion can be optimized by sand-blasting with suitable grain size or by mechanical roughening. The use of a primer can improve the adhesion on certain surfaces (for details see table). For non-absorbent materials like aluminium, steel, stainless steel, brass, zinc, tinplate, plastics like PA 6.6, GRP, PUR, lacquered surfaces, enamel, ceramic...

The specifications and recommendations given in this brochure must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge. control and responsibility. this information is provided without any obligation. We do guarantee the continuously high quality of our products. However. own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility...