Catalogs >
WEICON >
GMK 2410 Contact Adhesive TDS

GMK 2410 Contact Adhesive TDS
1Pages

Catalog excerpts

Technical Datasheet Create Date: 17.11.2017 - Seite 1/1 permanently elastic resistant to humidity GMK 2410 is an adhesive based on polychloroprene (CR) for the high-strength, full-surface and flexible bonding of: - rubber to rubber - rubber to metal WEICON GMK 2410 also bonds cellular rubber (e. g. neoprene), leather, felt, insulating material, textiles, wood, and many plastics. GMK 2410 is not suitable for materials such as expanded polystyrene, polyethylene, polypropylene, fl exible PVC foam, and artificial PVC leather. The product can be used for many industrial applications. Technical Data Surface pre-treatment The parts to be bonded must be clean and dry and free of dust or grease (WEICON Surface Cleaner). Roughening the surfaces increases the bonding power efficiently. Processing Stir the product well before use and then evenly apply a thin layer over the entire surface to be bonded with a paint brush or spatula (smooth or fine-toothed). Two or three thin layers may be required depending on the type of material and application. Depending on the layer thickness, ambient temperature and air humidity, allow the coated surfaces to evaporate for 5 - 10 minutes. With absorbent surfaces (e.g. felt), an additional adhesive layer should be applied after evaporating. As soon as t Storage At room temperature (+15°C to +25°C), dry, in densely closed packaging Storage stability: 12 months in unopened container Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed. GMK 2410 Contact Adhesive 185 g GMK 2410 Contact Adhesive 300 g GMK 2410 Contact Adhesive 350 g GMK 2410 Contact Adhesive 700 g GMK 2410 Contact Adhesive 5 kg GMK 2410 Contact Adhesive 25 kg Processing Spatula, short Processing Spatula, long Sealant and Adhesive Remover, 400 ml Surface Cleaner, 400 ml Hand Protective Foam, 200 ml Viscosity adhesive Evaporation time Storage stability 12 months when unopened Storage at room temperature (+15°C to +25°C) dry, in densely closed packaging Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 info@weicon.de WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 info@weicon.ae WEICON Kimya Sanayi Tic. Ltd. §ti. Turkey phone +90 (0) 212 465 33 65 info@weicon.com.tr www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 info@weicon.co.za WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 info@weicon.com.sg WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 info@weiconcz.cz

Open the catalog to page 1