Technical Datasheet Create Date: 16.11.2017 - Seite 1/2 Fast-Metal Minute Adhesive Pressure Medium shear strength according to DIN 53283 at Steel sand blasted Linear shrinkage Temperature resistance ISSA-Code IMPA-Code with a high solids content, pasty very short pot life, fast-curing gap-filling, residual elastic WEICON Fast-Metal Minute Adhesive is ideal for repairs and bondings with larger bonding gaps or bigger tolerances. The gap filling properties make it suitable for rough and poorly fitting surfaces but also to fill in cracks, cavities and unlevelled surfaces. Fast-Metal Minute Adhesive can be used on numerous materials such as metal, plastic, fibre reinforced materials, ceramics, glass, stone and wood. Technical Data Base Epoxy resin highly filled pasty consistency, crack-filler Mixing ratio by weight (Resin / Hardener) Density of the mixture Viscosity of the mixture at 20°C (+68°F) Adhesive gap bridging up to max. Processing temperatur Curing temperature Surface pre-treatment To ensure a perfect bond, the surfaces to be joined must be clean and dry (e.g., clean and degrease using WEICON Surface Cleaner). Processing Fast-Metal Minute Adhesive can be processed directly from the double cartridge. Reject the first centimetre of the dosed bead. Mix the product thoroughly. Apply adhesive mixture quickly to only one of the surfaces to be bonded. Join both surfaces immediately afterwards. Storage When kept at a constant room temperature of about +20°C and unopened in dry conditions, WEICON Epoxy Adhesives will keep for at least 18 months. Avoid direct sunlight. If these storage instructions are disregarded, the storage life will be reduced to 6 months. Epoxy resins are fundamentally liable to crystallise at temperatures of less than +5°C. This effect is accentuated by wide variations in temperature such as can frequently occur during transport in winter. This also has a negative effect on working qualities, curing and technical details, although these effects can be reversed by warming up to a maximum of +50°C (no naked flame). In the case of WEICON Epoxy Adhesives, careful selection and combination of the base resins (bisphenol A and F) ensures a reduction of crystallisation. Pot-life at 20°C (+68°F) for 10ml material Handling strength (35% strength) after Capable of bearing mechanical loads (50% strength) after Final strength (100%) after Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed. Medium strength of the pure epoxy resin according to DIN 53281-83 Fast-Metal Minute Adhesive 24 ml Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 [email protected] WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 [email protected] WEICON Inc. Canada phone +1 877 620 8889 [email protected] www.weicon.ca WEICON Kimya Sanayi Tic. Ltd. Şti. Turkey phone +90 (0) 212 465 33 65 [email protected] www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 [email protected] WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 [email protected] WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 [email protected] WEICON Ibérica S.L. Spain phone +34 (0) 914 7997 34 [email protected] WEICON Romania SRL Romania phone +40 (0) 3 65 730 763 off

Technical Datasheet Create Date: 16.11.2017 - Seite 2/2 Sealant and Adhesive Remover, 400 ml Surface Cleaner, 400 ml Hand Protective Foam, 200 ml Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests...