Easy-Mix Metal Epoxy Adhesive TDS
2Pages

Technical Datasheet Create Date: 17.11.2017 - Seite 1/2 Easy-Mix Metal Epoxy Adhesive Bending Medium shear strength according to DIN 53283 at Steel sand blasted Linear shrinkage Temperature resistance Surface pre-treatment To ensure a perfect bond, the surfaces to be joined must be clean and dry (e.g., clean and degrease using WEICON Surface Cleaner). Ideal for bonding of metal parts self-levelling, viscous fast curing WEICON Easy-Mix Metal can be used on numerous materials such as metal, plastic, fibre reinforced materials, ceramics, glass, stone and wood. Suitable for bonds requiring larger tolerances to be bridged and for grouting works. Technical Data Base Epoxy resin Mixing ratio by weight (Resin / Hardener) Density of the mixture Viscosity of the mixture at 20°C (+68°F) Adhesive gap bridging up to max. Processing temperatur Curing temperature Pot-life at 20°C (+68°F) for 10ml material Handling strength (35% strength) after Capable of bearing mechanical loads (50% strength) after Final strength (100%) after Medium strength of the pure epoxy resin according to DIN 53281-83 Pressure Processing WEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded. The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all. Storage When kept at a constant room temperature of about +20°C and unopened in dry conditions, WEICON Epoxy Adhesives will keep for at least 18 months. Avoid direct sunlight. If these storage instructions are disregarded, the storage life will be reduced to 6 months. Epoxy resins are fundamentally liable to crystallise at temperatures of less than +5°C. This effect is accentuated by wide variations in temperature such as can frequently occur during transport in winter. This also has a negative effect on working qualities, curing and technical details, although these effects can be reversed by warming up to a maximum of +50°C (no naked flame). In the case of WEICON Epoxy Adhesives, careful selection and combination of the base resins (bisphenol A and F) ensures a reduction of crystallisation. Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed. Available sizes: 10652050 Easy-Mix Metal Epoxy Adhesive 50 ml Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 info@weicon.de WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 info@weicon.ae WEICON Inc. Canada phone +1 877 620 8889 info@weicon.ca www.weicon.ca WEICON Kimya Sanayi Tic. Ltd. Şti. Turkey phone +90 (0) 212 465 33 65 info@weicon.com.tr www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 info@weicon.co.za WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 info@weicon.com.sg WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 info@weiconcz.cz WEICON Ibérica S.L. Spain phone +34 (0) 914 7997 34 info@weicon.es

Technical Datasheet Create Date: 17.11.2017 - Seite 2/2 Mixing Nozzles, Helix Dispenser D 50, Sealant and Adhesive Remover, 400 ml Surface Cleaner, 400 ml Hand Protective Foam, 200 ml Dosing Tips, Typ A Size 0,5 Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously...