Easy-Mix HT 180 Epoxy Adhesive TDS
2Pages

Technical Datasheet Create Date: 17.11.2017 - Seite 1/2 Processing temperatur Curing temperature Handling strength (35% strength) after Capable of bearing mechanical loads (50% strength) after Final strength (100%) after Medium strength of the pure epoxy resin according to DIN 53281-83 Medium shear strength according to DIN 53283 at Galvanized steel high-temperature resistant steady shock and impact resistant Steel sand blasted WEICON Easy-Mix HT 180 is a 2-component adhesive on epoxy resin basis and has a high temperature resistance of up to +180°C; short term to +230°C. The adhesive is highly viscous and stable which makes it also suitable for vertical applications. It is shock and impact resistant, has a long pot life, cures at room temperature, can be processed mechanically and his special fillers allow a constant bonding line. The adhesive is particularly suitable for the bonding of composite materials and metal and can be spot-welded while curing. Easy-Mix HT 180 can furthermore be utilised for plastics, ceramic, glass, stone or wood and is suitable for adhesions where larger tolerances have to be bridged. Due to special fillers it is possible to achieve a constant and reliable bonding line of at least 0.20 -0.25 mm. The high temperature resistance permits the bonding of components which require powder-coating after complete curing. Technical Data Base Epoxy resin mineral-filled Composition paste consistency, crack-filler Colour black Mixing ratio by weight (Resin / Hardener) 2:1 Viscosity of the mixture at 20°C (+68°F) pasty Temperature resistance -50 to 180 briefly to +230 °C Surface pre-treatment To ensure a perfect bond, the surfaces to be joined must be clean and dry (e.g., clean and degrease using WEICON Surface Cleaner). Processing WEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded. The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all. Storage When kept at a constant room temperature of about +20°C and unopened in dry conditions, WEICON Epoxy Adhesives will keep for at least 18 months. Avoid direct sunlight. If these storage instructions are disregarded, the storage life will be reduced to 6 months. Epoxy resins are fundamentally liable to crystallise at Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 info@weicon.de WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 info@weicon.ae WEICON Kimya Sanayi Tic. Ltd. §ti. Turkey phone +90 (0) 212 465 33 65 info@weicon.com.tr www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 info@weicon.co.za WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 info@weicon.com.sg WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 info@weiconcz.cz

Technical Datasheet Create Date: 17.11.2017 - Seite 2/2 temperatures of less than +5°C. This effect is accentuated by wide variations in temperature such as can frequently occur during transport in winter. This also has a negative effect on working qualities, curing and technical details, although these effects can be reversed by warming up to a maximum of +50°C (no naked flame). In the case of WEICON Epoxy Adhesives, careful selection and combination of the base resins (bisphenol A and F) ensures a reduction of crystallisation. Safety and health When using WEICON products, the physical,...