AL-W High Performance Grease TDS


Catalog excerpts

AL-W High Performance Grease TDS - 1

Technical Datasheet Create Date: 17.11.2017 - Seite 1/1 AL-W High Performance Grease Storage stability Storage stability Federal German Armed Forces TL 9150-0066, NATO specification G-460 Storage stability Temperature resistance Surface pre-treatment Clean surfaces. Processing Apply AL-W evenly. special lubricant for underwater applications AL-W high performance grease is a special lubricant and corrosion protection which can also be used for underwater applications. WEICON AL-W offers effective protection against aggressive liquids such as sea or wastewater, both in the maritime sector and in wet plants. WEICON AL-W is suitable for rolling and sliding bearings even in mixed friction operation, for joints, levers, sliding guides, spindles, spline shafts, open gears, worm gears, chains and wire cables and at all sliding speeds permitted for grease lubrication. Technical Data Abbreviation (DIN 51502) Consistency assignment (DIN 51818) Composition NLGI-Class 1-2 Spec. calcium soap / mineral oil VKA-TEST (DIN 51350) welding load AL-W High Performance Grease 400 g AL-W High Performance Grease 1.0 kg AL-W High Performance Grease 5.0 kg AL-W High Performance Grease 25.0 kg Processing Spatula, short Processing Spatula, long Hand Protective Foam, 200 ml WEICON Cleaner S, 5 L VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N) Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets ( must be observed. VKA-TEST (DIN 51350) goods load Storage Keep in closed original container. Do not store together with oxidizing agents. Keep container tightly closed and store at cool and aired place. Recommended storage temperature: room temperature. Speed identifying value Worked penetration ( DIN ISO 2137) Water resistance (DIN 51807) Kinematic viscosity (DIN 51562) at +40°C Kinematic viscosity (DIN 51562) at +100°C Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 WEICON Inc. Canada phone +1 877 620 8889 WEICON Kimya Sanayi Tic. Ltd. Şti. Turkey phone +90 (0) 212 465 33 65 WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 WEICON Ibérica S.L. Spain phone +34 (0) 914 7997 34 WEICON Romania SRL Romania phone +40 (0) 3 65 730 763 office@we

Open the catalog to page 1

All WEICON catalogs and technical brochures

  1. Catalogue 2019

    228 Pages

  2. Bio-Cut TDS

    1 Pages

  3. catalogue

    260 Pages


    10 Pages

Archived catalogs