AL-T High Performance Grease TDS


Catalog excerpts

AL-T High Performance Grease TDS - 1

Technical Datasheet Create Date: 17.11.2017 - Seite 1/1 high temperature grease long-term lubrication WEICON AL-T high performance grease is a universally usable high temperature grease for long-term lubrication. WEICON ALT is suitable for rolling and sliding bearings, joints, levers, sliding guides, spindles, spline shafts and at all sliding speeds permitted for grease lubrication. Technical Data Abbreviation (DIN 51502) Surface pre-treatment Clean surfaces. Processing Apply AL-T evenly. Storage Keep in closed original container. Do not store together with oxidizing agents. Keep container tightly closed and store at cool and aired place. Recommended storage temperature: room temperature. Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets ( must be observed. AL-T High Performance Grease 400 g AL-T High Performance Grease 1.0 kg AL-T High Performance Grease 5.0 kg AL-T High Performance Grease 25.0 kg Processing Spatula, short Processing Spatula, long Hand Protective Foam, 200 ml WEICON Cleaner S, 5 L Aluminium complex soap / mineral oil Density at +20°C (+68°F) (DIN 51757) VKA-TEST (DIN 51350) welding load VKA-TEST (DIN 51350) goods load VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N) Speed identifying value Worked penetration ( DIN ISO 2137) Water resistance (DIN 51807) Drop Point (IP 396) Kinematic viscosity (DIN 51562) at +40°C Storage stability Temperature resistance Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 WEICON Kimya Sanayi Tic. Ltd. §ti. Turkey phone +90 (0) 212 465 33 65 WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013

Open the catalog to page 1

All WEICON catalogs and technical brochures

  1. Catalogue 2019

    228 Pages

  2. Bio-Cut TDS

    1 Pages

  3. catalogue

    260 Pages


    10 Pages

Archived catalogs