Technical Datasheet Create Date: 17.11.2017 - Seite 1/1 long-life grease with MoS2 strong adhesion and high pressure resistant WEICON AL-M reduces friction and wear for a long time and is suited for rolling and slide bearings, joints, levers, sliding guides, spindles, camshafts, spline shafts, springs, open gears, worm gears and at all sliding speeds permitted for grease lubrication. Surface pre-treatment Clean surfaces. Processing Apply AL-M evenly. Storage Keep in closed original container. Do not store together with oxidizing agents. Keep container tightly closed and store at cool and aired place. Recommended storage temperature: room temperature. Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed. AL-M High Performance Grease 400 g AL-M High Performance Grease 1.0 kg AL-M High Performance Grease 5.0 kg AL-M High Performance Grease 25.0 kg Technical Data Abbreviation (DIN 51502) Processing Spatula, short Processing Spatula, long Hand Protective Foam, 200 ml WEICON Cleaner S, 5 L Li/Ca soap / MoS2 / mineral oil Density at +20°C (+68°F) (DIN 51757) VKA-TEST (DIN 51350) welding load VKA-TEST (DIN 51350) goods load VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N) Speed identifying value Worked penetration ( DIN ISO 2137) Water resistance (DIN 51807) Drop Point (IP 396) Kinematic viscosity (DIN 51562) at +40°C Kinematic viscosity (DIN 51562) at +100°C Storage stability Storage stability Temperature resistance ISSA-Code Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 [email protected] WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 [email protected] WEICON Kimya Sanayi Tic. Ltd. §ti. Turkey phone +90 (0) 212 465 33 65 [email protected] www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 [email protected] WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 [email protected] WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 [email protected]