Technical Datasheet Create Date: 17.11.2017 - Seite 1/1 AL-F High Performance Grease Allround High Performance Grease NSF approval WEICON AL-F can be used to lubricate rolling and sliding bearings, joints, levers, sliding guides, spindles, spline shafts, camshafts, open gears, worm gears and all grease lubrication points, even in the food industry. Technical Data Abbreviation (DIN 51502) Consistency assignment (DIN 51818) Composition Colour Lithium soap / mineral oil white Storage stability NSF-H 2, LFGB Section 31 and Section 5 Storage stability Temperature resistance Surface pre-treatment Clean surfaces. Processing Apply AL-F evenly. Storage Keep in closed original container. Do not store together with oxidizing agents. Keep container tightly closed and store at cool and aired place. Recommended storage temperature: room temperature. Safety and health When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed. AL-F High Performance Grease 350 g AL-F High Performance Grease 400 g AL-F High Performance Grease 1.0 kg AL-F High Performance Grease 5.0 kg AL-F High Performance Grease 25.0 kg Processing Spatula, short Processing Spatula, long Hand Protective Foam, 200 ml WEICON Cleaner S, 5 L Fast Cleaner, 5 L Density at +20°C (+68°F) (DIN 51757) VKA-TEST (DIN 51350) welding load VKA-TEST (DIN 51350) goods load VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N) Speed identifying value Worked penetration ( DIN ISO 2137) Water resistance (DIN 51807) Drop Point (IP 396) Note The specifications and recommendations given in this technical data sheet must not be seen as guaranteed product characteristics. They are based on our laboratory tests and on practical experience. Since individual application conditions are beyond our knowledge, control and responsibility, this information is provided without any obligation. We do guarantee the continuously high quality of our products. However, own adequate laboratory and practical tests to find out if the product in question meets the requested properties are recommended. A claim cannot be derived from them. The user bears the only responsibility for non-appropriate or other than specified applications. WEICON GmbH & Co. KG (Headquarters) Germany phone +49 (0) 251 9322 0 [email protected] WEICON Middle East L.L.C. United Arab Emirates phone +971 4 880 25 05 [email protected] WEICON Kimya Sanayi Tic. Ltd. §ti. Turkey phone +90 (0) 212 465 33 65 [email protected] www.weicon.com.tr WEICON SA (Pty) Ltd South Africa phone +27 (0) 21 709 0088 [email protected] WEICON South East Asia Pte Ltd Singapore phone (+65) 6710 7671 [email protected] WEICON Czech Republic s.r.o. Czech Republic phone +42 (0) 417 533 013 [email protected]