Fueling technology for natural gas
148Pages

2024 | Catalog | Fueling technology for CNG High-performance components for natural gas vehicles and fueling stations L YEARS Quality & Safety WEH® - We Engineer Hightech

© All rights reserved, WEH GmbH Verbindungstechnik. Any unauthorized copying, distribution or other use of the copyrighted content is strictly forbidden without the written consent of WEH GmbH Verbindungstechnik. Upon transmission of a newer version of this document, all previous versions are no longer valid. In principle, the latest version of the document is valid. This can be found at www.weh.com. Our General Terms and Conditions and the Agreement on Protection of Know-How and Quality Assurance (www.weh.com) shall apply to deliveries and other services, unless expressly agreed otherwise....

5 | Products for buses and trucks (and fueling stations) 86

Introduction ILLUSTRATIONS Source: www.erdgas-mobil.de Source: www.erdgas-mobil.de

» Introduction A VISION FOR A GLOBAL CHALLENGE With great foresight for a future global challenge, WEH Gas Technology has been a pioneer in the field of alternative fuels since 1986. The aim was to develop their own CNG fueling system with maximum safety and outstanding functionality. For acceptability reasons the system should give the operator the ‘feel’ of a conventional refueling system despite the highly complex technology. Today the WEH® CNG fueling system has become the worldwide NGV1 standard thus rewarding WEH’s entrepreneurial courage and foresight. A complete range of products...

All 250 bar (3,600 psi) fueling nozzles have a yellow color coding for operator's ease of use to visually identify the requested pressure range immediately. A yellow impact protection characterizes all 250 bar (3,600 psi) versions of the fueling nozzles: • TK16CNG • TK17CNG • TK22CNG • TK24CNG • TK26CNG The impact protections of the 200 bar (3,000 psi) versions remain black A yellow sliding sleeve characterizes all 250 bar (3,600 psi) versions of the fueling nozzles: • TK1 CNG • TK4CNG • TK10CNG The sliding sleeves of the 200 bar (3,000 psi) versions remain black. The fueling-sided...

» Standards, approvals and memberships CERTIFIED QUALITY MANAGEMENT Our high quality standard is achieved by a living quality management and the certification according to international quality standards is confirmed. INTERNATIONAL STANDARDS AND APPROVALS The following overview shows the standards and approvals of WEH® Products. For detailed information see the respective product. • ANSI NGV1 • ECE R110* • ISO 14469 • ISO 15500 • ISO 15501 * For reasons of precaution, we’d like to point out that a) regarding the delivery of each article acc. to the respective order confirmation - in...

2 | Products for car fueling stations Features • Left or right single-handed operation • Compatible with receptacles acc. to NGV1 standard and ISO 14469 (see page 7, compatibility) • WEH® EASY-TURN 360° swivel joint • Easy operation • Extremely high flow rate 4 short filling times • Recirculation of the vented gas • Plastic thermal protection • Hand grip with magnet • WEH® Jaw locking mechanism • Colour coded impact protection (200 bar / 3,000 psi black, 250 bar / 3,600 psi yellow) • High-grade materials • Coding for pressure range / gas type The first WEH user friendly 'Pistol grip' CNG...

Please see page 14 onwards for fueling assemblies consisting of fueling nozzle, hose set and breakaway coupling. The following accessories are available for the WEH® TK17 CNG Fueling nozzle: Dispenser mounting Mounting for safe attachment of the fueling nozzle to the dispenser. Optionally with or without switch actuation. Design: Aluminum, stainless steel

2 | Products for car fueling stations Filling and venting hoses for connecting fueling nozzle and TSAI CNG breakaway coupling, complete with fittings and press-fittings supported by coil spring stubs. Available as single or twin hoses (permanently bonded). * acc. to SAE J514, 37° cone All designs also available with permanently bonded filling and venting hose. Please contact us! Filling and venting hoses for connecting fueling nozzle / dispenser and TSA2 CNG inline breakaway coupling, complete with fittings and press-fittings supported by coil spring stubs. * acc. to SAE J514, 37° cone All...

Stainless steel fittings for connecting port 'B1' to the filling hose or port ‘C2' to the venting hose. When ordering please specify the part no. engraved on the fueling nozzle.

2 | Products for car fueling stations We also offer complete sets assembled and pressure tested for installation at fueling stations. The fueling assemblies consist of a fueling nozzle, a hose set and a breakaway coupling. All fueling assemblies are available with different hose lengths and can either be delivered with a type TSA1 CNG breakaway coupling directly mounted at the dispenser or a type TSA2 CNG inline breakaway coupling mounted inbetween the hoses. Application Fueling assembly for CNG fast filling of cars at self-service fueling stations.

All designs are also available with a TK17 CNG - 250 bar (3,600 psi) fueling nozzle or with permanently bonded filling and venting hose. Please contact us! * For connection sizes ‘B1' and ‘C2' see page 44, TSA1 CNG breakaway coupling. All designs are also available with a TK17 CNG - 250 bar (3,600 psi) fueling nozzle or with permanently bonded filling and venting hose. Please contact us! * For connection sizes ‘B1' and ‘C2' see page 128, TK17 CNG hose set.

2 | Products for car fueling stations Features • Super light 4 only 1,750 grams • Compatible with receptacles acc. to NGV1 standard and ISO 14469 (see page 7, compatibility) • WEH® EASY-TURN 360° swivel joint for actuation lever • Easy operation • Extremely high flow rate 4 short filling times • Recirculation of the vented gas • Plastic thermal protection • WEH® Jaw locking mechanism • Colour coded impact protection (200 bar / 3,000 psi black, 250 bar / 3,600 psi yellow) • High-grade materials • Coding for pressure range / gas type TK16 CNG, the world's most popular NGV1 fueling nozzle....