*mydirectindustry

Testing Equipment

Product catalog summary

High Frequency Spark Testers
Our WEG 100 and WEG 24 models are designed for efficient, non-destructive leak testing on thick coatings and linings. The WEG 100 tests thicknesses between 3 and 30mm, while the WEG 24 handles 1 to 30mm. These devices are suitable for testing weldings in plastic apparatus, tank, and pipeline construction.

Pinhole / Holiday Detectors
These detectors are used to identify porosity and faults in non-conductive coatings. The PD-series supports coating thicknesses from 4 microns to 25.6 mm and is widely used in industries like petrochemical and aerospace.

Low Voltage Pinhole Detector (LVPD1)
The LVPD1 uses a wet sponge method for testing dielectric coatings on conductive substrates up to 500µm. It features six preset ranges and displays test voltage, DC leakage current, and battery status on an LCD.

Wet Roof Leak Detector (WRLD)
Designed for use in wet conditions, the WRLD helps locate leaks on flat or low-pitched roofs without removing surface materials. It includes a waterproof carrying bag and a 200 m trace wire.

Airtest
This method tests overlap welds using air pressure, ensuring quality assurance even when testing is not mandatory.

Site-tensile Tester
Suitable for geomembranes, this tester performs peel and tensile tests according to DVS standards.

Electrodes for Testing Equipment
A variety of electrodes are available, including flexible, steel brush, bronze brush, and mesh wire electrodes, each with specific dimensions and connecting threads.

Technical Data
Detailed technical specifications are provided for each device, including power supply, output voltage range, material thickness, weight, and dimensions. Standards and conformity marks are also listed.

Additional Kits
Various kits are available, including basic, complete, pipeline, and roofing/bridge deck kits, each containing specific components like test units, batteries, probes, and electrodes.

Catalog excerpts

International GmbH

Open the catalog to page 1

Testing Equipment High Frequency Spark Testers Our High Frequency Spark Testers WEG 100 and WEG 24 are designed for a quick, cost effective and nondestructive leak test on thick coatings, linings and containers. Coating thicknesses between 3 and 30mm (WEG 100) and 1 to 30 mm (WEG 24) can be tested with the lightweight and ergonomically designed device. The WEG 100 and the WEG 24 can be used for testing of butt or overlap weldings in plasticapparatus, tank and pipeline construction or in the chemical industry. Pinhole / Holiday Detectors Our Pinhole / Holiday Detectors enable inspectors to check...

Open the catalog to page 2

Pinhole / Holiday Detectors Technical Data Output voltage range: Adjustable DC alarm sensitivity: Operating time (unit fitted with 10000 mAh NiMH cells): Test voltage formula: Weight: Dimensions (L x H x W mm): Consisting of: 1 x test unit with battery charger 4 x rechargeable batteries 1 x shoulder bag 1 x test probe handle 1 x coiled interconnecting lead 1 x 5 m earth lead 1 x steel brush electrode, 150 mm long 1 x test voltage calculator 1 x Instruction manual with calibration certificate Consisting of: 1 x test unit with battery charger 4 x rechargeable batteries 1 x shoulder bag 1 x test...

Open the catalog to page 3

High Frequency Spark Testers Power supply: Power consumption: Output voltage range: Site-tensile tester Technical Data Testing basis: Inspection method: Test speed: Item no. 20564 DVS-R 2225, part 4, sector 6.4.3 DVS-R 2227, part 1, sector 9.4 Peel test according to DVS 2225-4/2226-3 Tensile test according to DVS 2203-2 50 mm/min; Tolerance +/- 5,0 % Tensile force: Low Voltage Pinhole Detector PE-HD, PE-LD Drive: Fixing length (mm): LVPD1 Technical Data Standards: Power supply: 5 - 200, (clearance between the clamping jaws) Chuck jaws: Electromotive, 220 V, spindledrive with shaft joint forward...

Open the catalog to page 4

All Wegener International GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list