Catalogs >
WEG >
Solutions for Oil & Gas Industry

Solutions for Oil & Gas Industry
24Pages

Catalog excerpts

Motors | Automation | Energy | Transmission & Distribution | Coatings

At WEG you’ll find a full range of LV & MV electric motors, generators, variable speed drives, soft-starters, PLCs, switch and controlgear, transformers and industrial paints specifically designed for the Oil & Gas Industry. In addition to supplying state-of-the-art products, WEG has the expertise to serve your company with technical support and prompt service all over the world.

Open the catalog to page 2

WEG Serves the Oil & Gas Industry Globally WEG is a globally-recognized supplier of premium electric products for the industry. Our global structure allows us to be closer to our Oil & Gas customers. Over 32 subsidiaries established in key countries are prepared to provide you with technical and commercial support; our manufacturing plants strategically located in the main markets can serve you with short deliveries; and our network of over 1,250 Authorized Service Agents located in the five continents are fully equipped to give you prompt after sales and service support. Global Presence...

Open the catalog to page 3

Electric Motors www.weg.net

Open the catalog to page 4

Efficiency and Reliability for the Industry Manufacturing state-of-the-art LV & MV electric motors is what WEG has been doing since its foundation. Regardless of the market segment, the company continues to dedicate extensive resources and effort in order to produce long-lasting electric motors so as to ensure reliability of production for your industry. Special attention has been given to the design of suitable motors for the Oil & Gas Industry in various parts of the world. This is what sets WEG apart as the manufacturer of industrial motors compliant with the most demanding Oil & Gas...

Open the catalog to page 5

WEG full range of LV & MV W22 LV / MV General Purpose TEFC Motors W22Xn LV Non-Sparking TEFC Motors W22Xd MV Flameproof TEAAC Motors TGA & MGV Lines High Torque Motors for Drilling Output: up to 1,120 kW Voltage: up to 690 V Cooling: by ducts or blower WGM LV / MV General Purpose Water Jacket Cooled Motors HGF LV / MV General Purpose TEFC Motors LV / MV Non-Sparking TEFC Motors LV / MV Increased Safety TEFC Motors

Open the catalog to page 6

Electric Motors W22Xd LV Flameproof TEFC Motors W22Xd MV Flameproof TEFC Motors Master Line MV General Purpose Motors MV Non-Sparking Motors MV Increased Safety Motors MV Pressurized Motors Synchronous Motors MV General Purpose Motors MV Pressurized Motors Output: up to 50,000 kW Voltage: up to 14,400 V Cooling: open, air or water cooled Output: up to 110,000 kW Voltage: up to 14,400 V Cooling: open, air or water cooled

Open the catalog to page 7

Automation Technologies

Open the catalog to page 8

Industrial Systems Enhancing Productivity Advanced built-in technology for speed variation; compact solutions for short-circuit protection and overload conditions; high short-circuit breaking capacity; reliability and precision on monitoring, operation and protection of electric motors; wide range of accessories and global Certifications. These are some of the features and benefits offered by WEG. Counting on a team of senior engineers with extensive market and design experience, the company enjoys a confortable position as a manufacturer and supplier of variable speed drives,...

Open the catalog to page 9

Automation Techno MV Variable Speed Drives MVW01 g otor voltage: 2.3 kV; 3.3 kV; 4.16 kV M and 6.9 kV g ower ratings: 500 HP to 16,000 HP P (400 kW to 12,000 kW) g nput rectifier: 12, 18 and 24 pulses I (for the 4.16 kV line) and 36 pulses (for the 6.9 kV line) Main Advantages of WEG MVW01 VSD: g oltage Source (VSI) multilevel power V topology (NPC 3/5 up to 4.16 kV and 5/9 up to 6.9 kV) with high dynamic performance g atest generation of power L semiconductors with 6.5 kV IGBT’s g se of dry-type plastic film power U capacitors only (much longer life time than electrolytic capacitors) g...

Open the catalog to page 10

nologies CFW700 - General Purpose Drive g .1 to 55 kW - 1.5 to 75 HP - 1 220-240 V - Three-phase g .5 to 132 kW - 2 to 175 HP - 1 380-480 V - Three-phase g .5 to 110 kW - 2 to 150 HP - 1 500-600 V - Three-phase g ontrol: V/F, VVW or Vector C g onformal coating C g oft-PLC built-in S g nductors in DC bus I (IEC 61000-3-12 - Harmonics) LV Soft-Starters Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start...

Open the catalog to page 11

Power Generation

Open the catalog to page 12

Combined Flexible Products for Sustainable Energy WEG has the expertise to provide integrated energy solutions to drive all plant equipment. The products are designed to the highest quality standards and state-of-the-art technology demanded by the Oil & Gas Industry. WEG is a world leading company in the manufactury of power generation equipment and has the technological capabilty and capacity to offer the finest solutions for Oil & Gas applications. Counting on modern and fully-equipped manufacturing facilities and a team of experienced and highly qualified engineers, the company has the...

Open the catalog to page 13

Power Generation

Open the catalog to page 14

WEG´s extensive experience in the manufacture of synchronous generators, added to modern design, production capacity and testing facilities have resulted in competitive and reliable products designed to the most respected industry standarts such as API 546. ST40 Synchronous Generators g Ratings: up to 62,500 kVA at 1,800 RPM or up to 50,000 kVA at 1,500 RPM g Voltage: up to 14,400 V g Cooling: open, air or water cooled g Brushless design with electronic voltage regulator g Designed for safe or classified environments g NEMA or IEC designs ST20 Synchronous Generators g Ratings: up to 150,000...

Open the catalog to page 15

Power Transmission & Distribution

Open the catalog to page 16

Excellence in Power Supply Technologies Excellence in power supply technologies associated with the use of high quality raw material and product customization differentiate the WEG supplies of Transformers and Substations for the Oil & Gas Industry. Over 35,000 MVAs per year represents the reliable manufacturing capacity of WEG in the area of transformers, substations and high voltage power transmission and distribution equipment. This capacity is the result of a highly verticalized production process, providing flexibility and short delivery time. Dry Transformers Epoxy insulated Dry...

Open the catalog to page 17