Technical datasheet v2.0 3D Printing Material Masked Stereolithography MultiPurpose resin The High-Performance 3D Printing Material for Prototyping, Automotive, and Consumer Electronics Density Water absorption at saturation Suitability for food contact Tensile strength Elongation at break Elastic modulus Flexural strength Resilience Hardness HDT 0.45 MPa Vicat softening temperature ASTM D638 ASTM D638 ASTM D638 ASTM D790 ISO 179 ASTM D2240 ASTM D648 Printing layer height 0,10 mm (0,004 in) Maximum dimensions 274x155x400 mm (10.8x6.1x15.7 in) Tolerances ± 0,30mm < 100mm / ± 0,3% > 100mm Applications Replacement injection moulding for both prototypes and series, Automotive, Electronics and consumer goods Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 19/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.