Weerg, PVC Polyvinyl chloride CNC-machined polymer: a durable, cost-effective and corrosion-resistant material. Density Water absorption at saturation Hygroscopicity Tensile strength Elongation at break Yield strength Elastic modulus Flexural strength Resilience Hardness HDT 0.45 MPa HDT 1.8 MPa Vicat softening temperature Melting temperature Flammability Maximum dimensions 500x500x50 mm (19.7x19.7x2 in) Tolerances ±0,10mm ±0,07mm ±0,05mm Applications Material suitable for the manufacture of durable, economical and corrosion-resistant parts. Suitable for contact with foodstuffs. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 07/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.

Thermal conductivity (20°C) Volumic electrical resistivity Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical...