PPS Glass Filled
1Pages

Fused Deposition Modeling PPS Glass Filled Glass Filled Polyphenylene sulfide PPS GF (glass-filled polyphenylene sulphide) is a composite material that combines the outstanding properties of PPS together with the reinforcing effects of glass fibres. This high-performance thermoplastic offers higher mechanical strength, better dimensional stability and greater wear resistance than unfilled PPS. Density Water absorption at saturation Tensile strength Elongation at break Elastic modulus Resilience HDT 1.8 MPa Printing layer height 0,15 mm (0,006 in) Maximum dimensions 300x300x400 mm (11.8x11.8x15.7 in) Tolerances ± 0,60mm < 100mm / ± 0,75% > 100mm Applications A material loaded with 25% glass fibres, its tensile strength, hardness, resistance to chemicals and dimensional stability in wet environments make it widely used in the shipbuilding industry. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 07/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.