Fused Deposition Modeling PEEK Carbon FiberPEEK CF, Carbon PEEK PEEK CF has the highest mechanical properties among the materials achievable with Additive Manufacturing, allowing it to be applied in Metal Replacement practices in more extreme contexts and environments. Material properties Density Water absorption at saturation Tensile strength Elongation at break Elastic modulus Flexural strength Resilience Hardness HDT 0.45 MPa HDT 1.8 MPa Melting temperature Flammability Thermal conductivity (20°C) Printing layer height 0,15 mm (0,006 in) Maximum dimensions 300x300x300 mm (11.8x11.8x11.8 in) Infill 30% Shell thickness 1,8 mm (0,07 in) Tolerances ± 0,60mm < 100mm / ± 0,6% > 100mm Applications The material has the highest mechanical properties among those achievable with Additive Manufacturing using plastics, allowing it to be applied in Metal Replacement practices in the most extreme contexts and environments. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Weerg. Technical datasheet v2.0 (last review 07/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.