Fused Deposition Modeling PEEK Annealed Polyether ether ketone PEEK is a polymer used in the industrial and aerospace field thanks to its exceptional mechanical properties, very similar to those of some metal alloys: in its filament-worked version, it allows to obtain complex geometries, freeing the Designer of most of the design constraints and limitations of traditional manufacturing technologies. Density Water absorption at saturation Tensile strength Elongation at break Elastic modulus Flexural strength Resilience Hardness HDT 1.8 MPa Melting temperature Flammability Thermal conductivity (20°C) Printing layer height 0,15 mm (0,006 in) Maximum dimensions 300x300x400 mm (11.8x11.8x15.7 in) Infill 30% Shell thickness 1,8 mm (0,07 in) Tolerances ± 0,60mm < 100mm / ± 0,75% > 100mm Applications Excellent for both prototypes and final components. Fantastic specific strength, superior to some non-ferrous alloys. Chemical and thermal resistance allowing use in harsh environments. Suitable for mechanical components, brackets, casings and covers. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 07/09/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.