Fused Deposition Modeling Nylon PA6 Carbon FiberNylon 6 CF, PA6CF, Nylon 6 Carbon Fiber A strong, stiff and heat-resistant composite combining the properties of carbon fiber and nylon. It has excellent chemical resistance, low friction, and high impact strength. It is lightweight, making it attractive for aerospace and automotive applications. Material properties Density Water absorption at saturation Tensile strength Elongation at break Elastic modulus Flexural strength Resilience HDT 0.45 MPa Printing layer height 0,15 mm (0,006 in) Maximum dimensions 300x300x400 mm (11.8x11.8x15.7 in) Infill 30% Shell thickness 1,8 mm (0,07 in) Tolerances ± 0,60mm < 100mm / ± 0,75% > 100mm 4500 130,5 13,34 155 Applications Excellent for conceptual and functional prototypes. Good chemical resistance and excellent flexural rigidity due to the addition of short carbon fibres. Suitable for mechanical components, tooling and brackets. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Weerg. Technical datasheet v2.0 (last review 29/08/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.