Weerg, Nylon PA12 Poliammide 12, Nylon 12 Nylon PA12 MJF is a versatile material that allows you to quickly make prototypes and functional parts (1 to 10,000 parts in 3 days). It is a real alternative to injection molding and gives you absolute design freedom. Density Water absorption at saturation Hygroscopicity Suitability for food contact Tensile strength Elongation at break Yield strength Elastic modulus Flexural strength Resilience Hardness HDT 0.45 MPa HDT 1.8 MPa Printing layer height 0,08 mm (0,003 in) Maximum dimensions 380x284x380 mm (15x11.2x15 in) Tolerances ± 0,30mm < 100mm / ± 0,3% > 100mm Applications For functional prototypes and final parts. Excellent chemical resistance to oil, grease, hydrocarbons. Excellent base for subsequent surface finishes. US FDA guidance for Intact Skin Surface Device ,Statement of Composition for Toy Applications. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 29/08/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.