Weerg, Nylon PA11 Poliammide 11, Nylon 11 Characterised by high ductility and flexibility, it is an optimal choice where strength and performance are essential Density Water absorption at saturation Suitability for food contact Tensile strength Elongation at break Yield strength Elastic modulus Flexural strength Resilience Hardness HDT 0.45 MPa HDT 1.8 MPa Printing layer height 0,08 mm (0,003 in) Maximum dimensions 380x284x380 mm (15x11.2x15 in) Tolerances ± 0,50mm < 100mm / ± 0,5% > 100mm Applications For functional prototypes and automotive and consumer electronics end parts. Excellent impact and fatigue resistance for parts requiring hundreds of opening and closing cycles. Can replace injection moulded parts. Resistant to hydrocarbons and oils. Information contained in this data sheet is up-to-date and correct as at the date of issue. As Weerg cannot control or anticipate the conditions under which this product may be used, each user should review the information in the specific context of the planned use. To the maximum extent permitted by law, Weerg will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet. No express or implied warranties are given other than those implies mandatory by law. Technical datasheet v2.0 (last review 29/08/2023) Instant quotes for 3D printed and CNC machined parts at www.weerg.com or contact us at +39 041 5383540.